|
|
Brunel University Research Archive (BURA) >
Special Research Institutes >
Brunel Centre for Advanced Solidification Technology (BCAST) >
Browsing "Brunel Centre for Advanced Solidification Technology (BCAST)" by Issue Date
Showing results 1 to 50 of 66
| Issue Date | Title | Author(s) | | 2013 | New approaches to casting hypereutectic Al-Si alloys to achieve simultaneous refinement of primary silicon and modification of eutectic silicon | Fan, Z; Stone, I; Al-Helal, Kawther |
| 2013 | Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments | Holroyd, NJH; Scamans, GM |
| 2013 | Solidification behaviour of magnesium alloys | Fan, Z; Jiang, Bo |
| 2013 | Relationship between solidification microstructure and hot cracking susceptibility for continuous casting of low-carbon and high-strength low-alloyed steels: A phase-field study | Böttger, B; Apel, M; Santillana, B; Eskin, DG |
| 2013 | An epitaxial model for heterogeneous nucleation on potent substrates | Fan, Z |
| 2013 | Microstructural evolution and solidification behavior of Al-Mg-Si alloy in high-pressure die casting | Ji, S; Wang, Y; Watson, D; Fan, Z |
| 2013 | Influence of grain-refiner addition on the morphology of fe-bearing intermetallics in a semi-solid processed Al-Mg-Si alloy | Smith, T; O'Reilly, K; Kumar, S; Stone, I |
| 2012 | Influence of melt feeding scheme and casting parameters during direct-chill casting on microstructure of an AA7050 billet | Zhang, L; Subroto, T; Katgerman, L; Eskin, DG; Miroux, A |
| 2012 | The impact of melt-conditioned twin-roll casting on the downstream processing of an AZ31 magnesium alloy | Bayandorian, I; Huang, Y; Fan, Z; Pawar, S; Zhou, X, et al |
| 2012 | Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al-Mg alloys | Li, HT; Wang, Y; Fan, Z |
| 2012 | Measuring the viscous flow behaviour of molten metals under shear | Quested, P; Ritwik |
| 2012 | Continuous twin screw rheo-extrusion of an AZ91D magnesium alloy | Xia, M; Huang, Y; Cassinath, Z; Fan, Z |
| 2012 | Development of a super ductile diecast Al-Mg-Si alloy | Watson, D; Fan, Z; White, M |
| 2012 | Microstructural evolution under low shear rates during Rheo processing of LM25 alloy | Satya, SJ; Kumar, V; Barekar, NS; Biswas, K; Dhindaw, BK |
| 2011 | Solidification behaviour and mechanical properties of cast Mg-alloys and Al-based particulate metal matrix composites under intensive shearing | Hari Babu, N; Tzamtzis, Spyridon |
| 2011 | Effects of solute content on grain refinement in an isothermal melt | Men, H; Fan, Z |
| 2011 | Influence of intensive melt shearing on the microstructure and mechanical properties of an Al-Mg alloy with high added impurity content | Kumar, S; Hari Babu, N; Scamans, GM; Fan, Z |
| 2011 | Study of heterogeneous nucleation of eutectic Si in high-purity Al-Si alloys with Sr addition | Zarif, M; Mckay, B; Schumacher, P |
| 2011 | Faceting and branching in 2D crystal growth | Tegze, G; Toth, GI; Granasy, L |
| 2011 | Enhanced heterogeneous nucleation on oxides in Al alloys by intensive melt shearing | Fan, Z; Li, Hu-Tian |
| 2011 | Development of Niobium Boron grain retainer for aluminium silicon alloys | Nadendla, H B; Nowak, Magdalena |
| 2011 | Refining grain structure and porosity of an aluminium alloy with intensive melt shearing | Zuo, Y; Li, H; Xia, M; Jiang, B; Scamans, G M, et al |
| 2011 | Reconstruction of 2D Al Ti on TiB in an aluminium melt | Qin, T; Fan, Z |
| 2011 | Spin anisotropy of the magnetic excitations in the normal and superconducting states of optimally doped YBaCuO studied by polarized neutron spectroscopy | Headings, NS; Hayden, SM; Kulda, J; Babu, NH; Cardwell, DA |
| 2011 | Influence of ultrasonic melt treatment on the formation of primary intermetallics and related grain refinement in aluminum alloys | Zhang, L; Eskin, DG; Katgerman, L |
| 2011 | Ginzburg-landau-type multiphase field model for competing fcc and bcc nucleation | Toth, GI; Morris, JR; Granasy, L |
| 2011 | Cold cracking in DC-cast high strength aluminum alloy ingots: An intrinsic problem intensified by casting process parameters | Lalpoor, M; Eskin, DG; Ruvalcaba, D; Fjaer, HG; Ten Cate, A, et al |
| 2011 | Transition of amorphous to crystalline oxide film in initial oxide overgrowth on liquid metals | Men, H; Fan, Z |
| 2011 | Grain refinement in a AlZnMgCuTi alloy by intensive melt shearing: A multi-step nucleation mechanism | Li, HT; Xia, M; Jarry, P; Scamans, GM; Fan, Z |
| 2010 | Tuning the structure of non-equilibrium soft materials by varying the thermodynamic driving force for crystal ordering | Tegze, G; Granasy, L; Toth, GI; Dougls, JF; Pusztai, T |
| 2010 | Magnesium alloy strip produced by a melt-conditioned twin roll casting process | Fan, Z; Bayandorian, Iman |
| 2010 | Mg/hydroxyapatite composites for potential bio-medical applications | Hari Babu, N; Li, Zibiao |
| 2010 | Mechanisms of grain refinement by intensive shearing of AZ91 alloy melt | Men, H; Jiang, B; Fan, Z |
| 2010 | Solidification behavior of intensively sheared hypoeutectic Al-Si alloy liquid | Kotadia, HR; Hari Babu, N; Zhang, H; Arumuganathar, S; Fan, Z |
| 2010 | Solidification behaviour of Al-Sn-Cu immiscible alloys and Al-Si cast alloys processed under intensive shearing | Fan, Z; Kotadia, Hiren R |
| 2010 | Criteria of grain refinement induced by ultrasonic melt treatment of aluminum alloys containing Zr and Ti | Atamanenko, TV; Eskin, DG; Zhang, L; Katgerman, L |
| 2009 | Solidification of Al-Sn-Cu based immiscible alloys under intense shearing | Kotadia, HR; Doernberg, E; Patel, JB; Fan, Z; Schmid-Fetzer, R |
| 2009 | Processing of aluminum-graphite particulate metal matrix composites by advanced shear technology | Barekar, NS; Tzamtzis, S; Dhindaw, BK; Patel, J; Babu, NH, et al |
| 2009 | Solidification behavior and microstructural evolution of near-eutectic Zn-Al alloys under intensive shear | Ji, S; Fan, Z |
| 2009 | Diffusion-controlled anisotropic growth of stable and metastable crystal polymorphs in the phase-field crystal model | Tegze, G; Granasy, L; Toth, GI; Podmaniczky, F; Jaatinen, A, et al |
| 2009 | Melt-conditioned, high-pressure die casting of Mg–Zn–Y alloy | Xia, M; Mitra, S; Dhindaw, BK; Liu, G; Fan, Z |
| 2009 | Solidification and processing of aluminium based immiscible alloys | Kotadia, HR; Patel, JB; Fan, Z; Doernberg, E; Schmid-Fetzer, R |
| 2009 | Processing of ultrafine-size particulate metal matrix composites by advanced shear technology | Tzamtzis, S; Hari Babu, N; Fan, Z; Dhindaw, BK |
| 2009 | Crystal nucleation in the hard-sphere system revisited: A critical test of theoretical approaches | Tóth, GI; Granasy, L |
| 2009 | Advanced operator-splitting-based semi-implicit spectral method to solve the binary phase-field crystal equations with variable coefficients | Tegze, G; Bansel, G; Toth, GI; Pusztai, T; Fan, Z, et al |
| 2009 | Phase field approach to heterogeneous crystal nucleation in alloys | Warren, JA; Pusztai, T; Környei, L; Granasy, L |
| 2009 | Melt conditioning by advanced shear technology (MCAST) for refining solidification microstructures | Fan, Z; Xia, M; Zhang, H; Liu, G; Patel, JB, et al |
| 2009 | Shear enhanced heterogeneous nucleation in some Mg- and Al- alloys | Fan, Z; Wang, Y; Zhang, ZF; Xia, M; Li, HT, et al |
| 2008 | Twin roll casting and melt conditioned twin-roll casting of magnesium alloys | Bian, Z; Bayandorian, I; Zhang, H W; Fan, Z |
| 2008 | Nucleation and phase selection in undercooled melts: Magnetic alloys of industrial relevance (MAGNEPHAS) | Löser, W; Hermann, R; Woodcock, TG; Fransaer, J; Krivilyov, M, et al |
Showing results 1 to 50 of 66
|
