Collection's Items (Sorted by Submit Date in Descending order): 21 to 70 of 651
| Issue Date | Title | Author(s) |
| 2023 | Development of advanced material modelling for metal additive manufacturing | Allen, Maddie |
| 2022 | Two-phase heat transfer in multi-channel flat heat pipes | Guichet, Valentin Patrick Pascal |
| 2022 | Development of a sample preparation platform for bacterial and viral pathogens | Evans, Aaron D. J. A. |
| 2022 | Experimental study of alcohol fuels on engine performance, efficiency and emissions | Lu, Enshen |
| 2022 | Regenerative hydrogen fuel cell for remote, off-grid telecommunication towers | Jansen, Gerard |
| 2022 | A comprehensive approach towards detection of sub-surface microscopic damage in low alloy ferritic steels using ultrasonic technique | Kumar, Harendra |
| 2022 | Studies of texture and mechanical properties of 6xxx automotive alloy extrusions | Tzileroglou, Chrysoula |
| 2021 | Turbulent boundary layer noise mitigation by geometrical surface treatments and near wall passive flow control devices | Muhammad, Chioma |
| 2022 | Bayesian inference and failure analysis for risk assessment in quality engineering | Koucha, Yacine |
| 2022 | Perlite based core materials for vacuum insulation panels – development and characterisation | Verma, Sankarshan |
| 2022 | Experimental and numerical studies of laser riveting for dissimilar materials joining | Li, Bowei |
| 2022 | Solar photovoltaics for buildings: Development and performance assessment | Parupudi, Ranga Vihari |
| 2022 | Transient modelling of heat pipe heat exchangers with vertical thermosyphons for the purpose of waste heat recovery from industrial exhaust gases | Brough, Daniel J. |
| 2021 | Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization | Mustafa, Khalid |
| 2022 | Experimental study of a novel valvetrain system on SI engine efficiency and emissions | Minasyan, Anna |
| 2021 | An investigation into multi-component gasoline biofuel droplet and spray using non-ideal vapour-liquid equilibrium models | Yang, Wan |
| 2021 | Flow boiling in multi microchannels using refrigerant R134a and R1234yf | Al-Janabi, Rand Mohamad Ali |
| 2021 | Multiscale modelling of twin roll casting | Qiu, Yi |
| 2022 | Numerical investigation and experimental validation of a heat pipe based PV/T system | Khordehagh, Navid |
| 2021 | Technological assessment of animal waste-based energy conversion systems | Katsaros, Giannis |
| 2021 | Predicting fatigue life of welded joints under variable amplitude loading spectra | Liu, Xu |
| 2020 | Conceptual design and development of a research tool: - the Vagina-on-chip (VOC) | Naveenathayalan, Angel Kayalvilli |
| 2021 | Novel approaches towards mooring integrity in-situ monitoring fatigue crack growth evaluation using acoustic emission parametrical analysis | Angulo Grandmontagne, Ángela |
| 2021 | Supercritical carbon dioxide power cycles for waste heat recovery applications | Marchionni, Matteo |
| 2021 | Aerofoil self noise reduction by innovative trailing edge treatment | Woodhead, Philip Charles |
| 2021 | Towards the production of adsorbents from mixed domestic discarded materials using heat pipe pyrolysis | Hoslett, John Joseph |
| 2021 | On the quantification of arterial wall mechanical properties using invasive and non-invasive experimental investigations and analytical techniques | Giudici, Alessandro |
| 2021 | Experimental, computational and sustainability study of energy-efficient technologies for residential buildings in hot countries | Shittu, Emmanuel |
| 2021 | Development of the hot forming system using reconfigurable forming dies, digital twin and topology optimisation | Aly, Belal M |
| 2021 | Modelling of gasoline injection process and its application to the development of a new GDI engine | Peethambaram, Mohan Raj |
| 20-Apr-2020 | Towards Unblinding the Surgeons: Complex Impedance for Electrode Array Insertion Guidance in Cochlear Implantation | Hafeez, N; Du, X; Boulgouris, N; Begg, P; Irving, R; Coulson, C; Tourrels, G |
| 2021 | Material bond, formation, and growth, in Al/Mg compound castings | Schneider, Kilian |
| 2020 | An experimental study on high pressure sprays and on the combustion and sooting tendencies of oxygenated fuels | Ruiz Rodriguez, Irene del Carmen |
| 2021 | Optimisation of waisted tensile test specimen geometry and determination of tensile energy welding factors for different polyethylene pipe wall thicknesses | Taghipourfard, Mohammad |
| 2021 | Probability of failure feedback loop due to internal corrosion in oil production systems | Quinn, Martin |
| 2021 | Physically based constitutive model for damage in composites under dynamic loads | Gałka, Agata Zuzanna |
| 2021 | Development of Innovation Acceptance Model for Wearable Computing: A Study of Users’ Technology Acceptance in Malaysia | Mohamad Taib, Syakirah |
| 2021 | Impact of joining dissimilar steel and aluminium for future automotive structures | Oliveira, André |
| 2021 | Fractional solidification for recycled aluminium alloys | Venditti, Susanna |
| 2021 | Thermal and residual stress analysis of welded joints in cladded pipelines | Kogo, Bridget Enoba |
| 2021 | Artificial intelligence for optimisation and demand side response in built environment | Mesa Jiménez, José Joaquín |
| 2021 | Application of upstream wind tunnel model mounting to the investigation of lobe-mixing geometries for road vehicle drag reduction | Rejniak, Aleksandra Anna |
| 2021 | Investigations into the utilisation of chicken litter for power generation | Simbolon, Luga Martin |
| 2020 | Development of a biological electrochemical system for decentralised wastewater treatment and energy production in remote and under-served regions | Fudge, Thomas |
| 2019 | Modelling of shock waves in FCC and BCC metals using a dislocation based continuum approach | Kiely, Lewis |
| 2021 | Flow Boiling of HFE-7200 in Multi-Microchannel Heat Sinks for High-Heat Flux Applications | Lee Yue Sze, Vivian |
| 2021 | Computational fluid dynamic of single and two phase flow in microchannels | Sahar, Amirah Mohamad |
| 2020 | Methods for surface age estimation and study of evaporative cooling induced air-water gas transfer | Ali, Fatima |
| 2021 | Classification of Small to Medium Size Manufacturing Enterprises in Fluctuating Economic Conditions | Sayad Saravi, Atefeh |
| 2020 | Optical Studies of Gasoline Sprays and In-cylinder Mixture Formation using a High Pressure Multi-hole Injector | Dhanji, Meghnaa Paresh |
Collection's Items (Sorted by Submit Date in Descending order): 21 to 70 of 651
