2026-09-22T07:13:56Zhttps://bura.brunel.ac.uk/oai/request

oai:bura.brunel.ac.uk:2438/46012014-11-01T11:21:34Zcom_2438_23com_2438_58com_2438_8641com_2438_8620col_2438_3672col_2438_179col_2438_8643

Harrison, DJ Southee, D Wood, Julian 2010-11-26T13:01:00Z 2010-11-26T13:01:00Z 2010 http://bura.brunel.ac.uk/handle/2438/4601 This thesis was submitted for the degree of Master of Philosophy and awarded by Brunel University. This thesis presents the design and development of a hand-held electronic reader, designed to decode conductive patterns printed on a paper substrate. Data read from the patterns, by the reader, is used to trigger events in the digital domain. The reader and associated conductive patterns are devices for linking paper documents with the digital world. The patterns are formed by masking conductive-coated paper with a non-conductive, printed lacquer. The reader is a low cost and ergonomic device, capable of transmitting the embedded data from the conductive paper to the computer. The first reader designed and developed was tethered to a computer by data cable, using the USB communication protocol. The second design was developed further, with transmission of data achieved by replacing the cable with short-range Bluetooth wireless technology. Both devices were designed and developed using embedded systems and low cost electronic components. Additional work was undertaken to optimise the device's mechanical structure, ergonomics and integration of hardware. Alongside the development of the reader, test and development work was carried out to optimise the printed media, in materials and design. User trials demonstrated that the complete printed and reading system was functional, with varied rates of success among participants. Further work is required to improve the conductivity of the coated paper, and the accuracy of the decoding algorithm. Submitted by Carolyn Bailey (carolyn.bailey@brunel.ac.uk) on 2010-11-26T13:00:02Z No. of bitstreams: 1 Fulltext.pdf: 4138645 bytes, checksum: 2fe2d73455c4adb7de015c73013f1d7c (MD5) Approved for entry into archive by Carolyn Bailey(carolyn.bailey@brunel.ac.uk) on 2010-11-26T13:01:00Z (GMT) No. of bitstreams: 1 Fulltext.pdf: 4138645 bytes, checksum: 2fe2d73455c4adb7de015c73013f1d7c (MD5) Made available in DSpace on 2010-11-26T13:01:00Z (GMT). No. of bitstreams: 1 Fulltext.pdf: 4138645 bytes, checksum: 2fe2d73455c4adb7de015c73013f1d7c (MD5) This work resulted from a research project funded by EU FP6. en Brunel University School of Engineering and Design Theses http://bura.brunel.ac.uk/bitstream/2438/4601/1/FulltextThesis.pdf Hand-held electronic reader Conductive patterns Digital domain Contact barcode reader Low-visibility printed Design and application of a contact barcode reader, for use on low-visibility printed conductive patterns Thesis