Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/1760
Title: Characterization of lithographically printed resistive strain gauges
Authors: Hay, GI
Evans, PSA
Simpson, G
Harrey, PM
Southee, DJ
Harrison, DJ
Keywords: Conductive lithographic film (CLF); offset lithography; printed sensors; printed strain gauges
Issue Date: 2005
Publisher: IEEE
Citation: IEEE Sensors Journal. 00706-2004.R1. Vol. 5, October 2005.
Abstract: This paper reports progress in sensor fabrication by the conductive lithographic film (CLF) printing process. Work describing strain-sensitive structures manufactured using a modified printing process and conductive inks is addressed. The performance of a "single-ink" strain-sensitive structure when printed on six alternative substrates (GlossArt, PolyArt, Teslin, Mylar C, Melinex, and Kapton) is analyzed. Though not intending to compete with conventional gauges in high-tolerance measurement, the structures exhibit properties that indicate suitability for novel applications.
URI: http://bura.brunel.ac.uk/handle/2438/1760
DOI: http://dx.doi.org/10.1109/JSEN.2005.845209
ISSN: 1530-437X
Appears in Collections:Design
Dept of Design Research Papers

Files in This Item:
File Description SizeFormat 
Characterization of lithographically printed resistive strain gauges.pdf1.27 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.