Urban microclimate and climate change impact on the thermal performance and ventilation of multi-family residential buildings

Abstract

Copyright © 2023 The Author(s). Urban settings and climate change both impact on energy use and thermal comfort inside buildings. This paper first presents a study of changes in energy demand in residential buildings considering the overlapping effect of climate change and urban heat island intensity in two European locations; Cadiz (Spain) and London (United Kingdom), representing temperate and hot European climates and moderate and dense urban settings. Future-urban weather files were generated and simulations were run considering energy demand and indoor thermal comfort. In hot climate regions such as the one of Cadiz, future climate will increase the cooling demand and the additional impact of the UHI leads to a further increase of up to +28% of total energy demand compared to the current climate without considering urban effects. Future-urban weather conditions will be detrimental also for buildings in London, where the annual energy demand is predicted to increase by up to the 16% if future climate and urban effects are included. This is due to a higher increase in cooling demand compared to the reduction for the heating need. The paper also presents a method to take into account microclimatic conditions in naturally ventilated buildings, especially the effect of wind variations around the building which impacts natural ventilation rates. Air and surface temperature and wind speeds were studied using ENVImet and the resulting microclimatic conditions were used as inputs to the EnergyPlus Airflow Network model for the calculation of the building ventilation rates. It was found that ventilation rates are reduced (in comparison to meteorological weather files) and this reduction impacts negatively on internal operative temperatures. A thermal comfort analysis was carried out indicating that the selection of a suitable weather file and microclimatic conditions is essential for more accurate predictions of internal thermal comfort and will assist in the sizing of passive and active systems to avoid overheating.