Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/7068
Title: Design of a cognitive neural predictive controller for mobile robot
Authors: Al‐Araji, Ahmed
Advisors: Al-Raweshidy, H
Keywords: Mobile robot;trajectory tracking;Neural networks;Predictive controller;Path planning
Issue Date: 2012
Publisher: Brunel University School of Engineering and Design PhD Theses
Abstract: In this thesis, a cognitive neural predictive controller system has been designed to guide a nonholonomic wheeled mobile robot during continuous and non-continuous trajectory tracking and to navigate through static obstacles with collision-free and minimum tracking error. The structure of the controller consists of two layers; the first layer is a neural network system that controls the mobile robot actuators in order to track a desired path. The second layer of the controller is cognitive layer that collects information from the environment and plans the optimal path. In addition to this, it detects if there is any obstacle in the path so it can be avoided by re-planning the trajectory using particle swarm optimisation (PSO) technique. Two neural networks models are used: the first model is modified Elman recurrent neural network model that describes the kinematic and dynamic model of the mobile robot and it is trained off-line and on-line stages to guarantee that the outputs of the model will accurately represent the actual outputs of the mobile robot system. The trained neural model acts as the position and orientation identifier. The second model is feedforward multi-layer perceptron neural network that describes a feedforward neural controller and it is trained off-line and its weights are adapted on-line to find the reference torques, which controls the steady-state outputs of the mobile robot system. The feedback neural controller is based on the posture neural identifier and quadratic performance index predictive optimisation algorithm for N step-ahead prediction in order to find the optimal torque action in the transient to stabilise the tracking error of the mobile robot system when the trajectory of the robot is drifted from the desired path during transient state. Three controller methodologies were developed: the first is the feedback neural controller; the second is the nonlinear PID neural feedback controller and the third is nonlinear inverse dynamic neural feedback controller, based on the back-stepping method and Lyapunov criterion. The main advantages of the presented approaches are to plan an optimal path for itself avoiding obstructions by using intelligent (PSO) technique as well as the analytically derived control law, which has significantly high computational accuracy with predictive optimisation technique to obtain the optimal torques control action and lead to minimum tracking error of the mobile robot for different types of trajectories. The proposed control algorithm has been applied to monitor a nonholonomic wheeled mobile robot, has demonstrated the capability of tracking different trajectories with continuous gradients (lemniscates and circular) or non-continuous gradients (square) with bounded external disturbances and static obstacles. Simulations results and experimental work showed the effectiveness of the proposed cognitive neural predictive control algorithm; this is demonstrated by the minimised tracking error to less than (1 cm) and obtained smoothness of the torque control signal less than maximum torque (0.236 N.m), especially when external disturbances are applied and navigating through static obstacles. Results show that the five steps-ahead prediction algorithm has better performance compared to one step-ahead for all the control methodologies because of a more complex control structure and taking into account future values of the desired one, not only the current value, as with one step-ahead method. The mean-square error method is used for each component of the state error vector to compare between each of the performance control methodologies in order to give better control results.
Description: This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University
URI: http://bura.brunel.ac.uk/handle/2438/7068
Appears in Collections:Electronic and Computer Engineering
Dept of Electronic and Computer Engineering Theses

Files in This Item:
File Description SizeFormat 
FulltextThesis.pdf3.65 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.