Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/14265
Title: An experimental investigation of cutting temperature and tool wear in 2 dimensional ultrasonic vibrations assisted micro-milling
Authors: Ibrahim, MR
Rahim, Z
Rahim, E
Tobi, L
Cheng, K
Ding, H
Issue Date: 2016
Citation: MATEC Web of Conferences, 2017, 95
Abstract: © The Authors, published by EDP Sciences, 2017.Two dimensional Ultrasonic vibration assisted milling (2D UVAM) well knows process that involved in high tech system to generate ultra range of frequency applied to the milling process. More industries nowadays become aware taking this opportunity to improve their productivity without decreasing their product accuracies. This paper investigate a comparative machining between UVAM and conventional machining (CM) in tool wear and cutting temperature in milling process. Micro amplitude and sine wave frequency will be generate into the workpiece jig by piezo-Actuator. Thus, creating a micro gap that allow heat remove effectively with the chip produces. A more complex tool trajectory mechanics of 2D UVAM has been found during this research. The approaching the tool tip into the workpiece surfaces is affected by the amplitude displacement along the frequency applied. It is found that the tool wear was reduce and surface roughness improvement by applying the 2D UVAM compared to the CM when choosing the optimum amplitude and appropriate frequency.
URI: http://bura.brunel.ac.uk/handle/2438/14265
DOI: http://dx.doi.org/10.1051/matecconf/20179507005
ISSN: 2261-236X
Appears in Collections:Dept of Mechanical Aerospace and Civil Engineering Research Papers

Files in This Item:
File Description SizeFormat 
Fulltext.pdf385.36 kBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.