Showing results 1 to 20 of 23
next >
| Issue Date | Title | Author(s) |
| 10-Dec-2023 | Adaptive-Labeling for Enhancing Remote Sensing Cloud Understanding | Gala, J; Nag, S; Huang, H; Liu, R; Zhu, X |
| 24-Dec-2022 | Development of high thermal conductivity, enhanced strength and cost-effective die-cast Mg alloy compared with AE44 alloy | Feng, L; Dong, X; Xia, M; Zhu, X; Ji, G; Yang, H; Wang, B; Nyberg, EA; Ji, S |
| 18-Mar-2021 | The development of low-temperature heat-treatable high pressure die-cast Al-Mg-Fe-Mn alloys with Zn levels | Zhu, X; Liu, F; Wang, S; Ji, S |
| 4-Aug-2021 | Effect of carrier gases on the entrainment defects within AZ91 alloy castings | Li, T; Davies, JMT; Zhu, X |
| 24-Jan-2022 | The effect of solution temperature on the precipitates evolution and aging hardening response of Al-15%Mg2Si(-1%Cu) alloys | Sun, Y; Hu, M; Li, M; Li, C; Zhu, X; Xia, X; Yu, L; Liu, Y |
| 26-Oct-2018 | Effect of super vacuum assisted high pressure die casting on the repeatability of mechanical properties of Al-Si-Mg-Mn die-cast alloys | Dong, X; Zhu, X; Ji, S |
| 20-Dec-2019 | Effects of Ni on the microstructure, hot tear and mechanical properties of Al–Zn–Mg–Cu alloys under as-cast condition | Liu, F; Zhu, X; Ji, S |
| 10-Dec-2018 | The effects of varying Mg and Si levels on the microstructural inhomogeneity and eutectic Mg<inf>2</inf>Si morphology in die-cast Al–Mg–Si alloys | Zhu, X; Yang, H; Dong, X; Ji, S |
| 6-Jun-2018 | The formation mechanism of Al<inf>6</inf>(Fe, Mn) in die-cast Al-Mg alloys | Zhu, X; Blake, P; Ji, S |
| 17-Jun-2019 | The formation of Al<inf>6</inf> (Fe, Mn) phase in die-cast Al-Mg alloys | Zhu, X; Ji, S |
| 28-Jan-2020 | The Formation of Al<inf>6</inf>(Fe, Mn) Phase in Die-Cast Al–Mg Alloys | Zhu, X; Ji, S |
| 25-Aug-2020 | High as-cast strength die-cast AlSi9Cu2Mg alloy prepared by nanoparticle strengthening with industrially acceptable ductility | Dong, X; Youssef, H; Zhu, X; Zhang, Y; Wang, S; Ji, S |
| 22-Sep-2018 | High strength and ductility aluminium alloy processed by high pressure die casting | Dong, X; Yang, H; Zhu, X; Ji, S |
| 3-Dec-2020 | Improvement in as-cast strength of high pressure die-cast Al–Si–Cu–Mg alloys by synergistic effect of Q-Al5Cu2Mg8Si6 and θ-Al2<Cu phases | Zhu, X; Dong, X; Blake, P; Ji, S |
| 2018 | Investigation of fullerenol-induced changes in poroelasticity of human hepatocellular carcinoma by AFM-based creep tests | Zhu, X; Cirovic, S; Shaheen, A; Xu, W |
| 30-Jul-2021 | Morphologically templated nucleation of primary Si on AlP in hypereutectic Al-Si alloys | Zhu, X; Wang, S; Dong, X; Liu, X; Ji, S |
| 28-Jan-2018 | The morphology and distribution of Al<inf>8</inf>Mn<inf>5</inf>in high pressure die cast AM50 and AZ91 | Zeng, G; Zhu, X; Ji, S; Gourlay, CM |
| 21-Nov-2018 | Near-Net Forming Complex Shaped Zr-Based Bulk Metallic Glasses by High Pressure Die Casting | Liu, L; Zhang, T; Liu, Z; Yu, C; Dong, X; He, L; Gao, K; Zhu, X; Li, W; Wang, C; Li, P; Zhang, L; Li, L |
| 8-Mar-2024 | On Sc Addition in A206 Alloy: The Formation of W-AlCuSc Phase and Its Strength-Weakening Effect in Sand Castings | Li, T; Zhu, X; Gao, Y; Shan, L; Davies, JMT; Ji, S |
| 29-Jun-2017 | Refinement of eutectic microstructure in quaternary Al-Cu-Si-Mg alloys | Cai, Q; Fan, Z; Zhu, X; Zhang, Y; Gao, F; Chang, I |
