Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/5206
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorSammes, PG-
dc.contributor.authorKhorasani, Mohammad Taghi-
dc.date.accessioned2011-06-03T13:57:03Z-
dc.date.available2011-06-03T13:57:03Z-
dc.date.issued1997-
dc.identifier.urihttp://bura.brunel.ac.uk/handle/2438/5206-
dc.descriptionThis thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.en_US
dc.description.abstractSurface modification of polydimethylsiloxane (PDMS) based vulcanizate rubber by C02-pulsed laser as the excitation source, without a photosensitizer, was studied at room temperature. The modified surfaces were characterized using a variety of techniques including scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDXA), attenuated total reflectance infrared (ATR-IR) spectroscopy and water drop contact angle analysis. EDXA showed that all of the treated PDMS surfaces contained a higher ratio of O/Si than the base PDMS. SEM micrographs and water drop contact angle variations showed the uniform porosity and high decrease in the wettability of the surface of PDMS respectively. The bulk mechanical properties of PDMS after laser-treatment did not change, as shown by dynamic mechanical thermal analysis (DMTA). The friction coefficient of the surface of the modified silicone decreased drastically, even after only one pulse was delivered to it. Data from in vitro blood compatibility experiments indicated a significant reduction of platelet adhesion and aggregation for the modified surfaces and those platelets which were adherent remained unspread (no activation). The extent of reduction of platelet adhesion was correlated to the number of laser pulses. The attachment of anchorage dependent cells, namely Baby Hamster Kidney (BILK) fibroblastic cells was investigated under stationary culture conditions. The laser treated surfaces showed little adhesion, no spreading and growth properties. This technique can be employed to prepare PDMS samples in which one surface is laser treated and the other is untreated. Such materials may be useful in, for example, medical implants in which one (the treated) surface is in contact with a blood supply and hence does not cause cell aggregation (clotting) and the other side is tissue compatible (allows adhesion of tissue). Acrylamide (AAm), 2-hydroxyethylmethacrylate (HEMA) and hydroxyethylmethacrylate phosphatidyl choline (HEMAPC) were grafted onto preirradiated PDMS. Platelet adhesion and cell attachment studies show that the biocompatibility of the AAm and HEMA grafted PDMS are intermediate between that of untreated PDMS and either the HEMAPC grafted PDMS surface, or PDMS surfaces that had been treated with 10 CO. laser pulses.en_US
dc.language.isoenen_US
dc.publisherBrunel University Institute for the Environment PhD Theses-
dc.relation.urihttp://bura.brunel.ac.uk/bitstream/2438/5206/1/FulltextThesis.pdf-
dc.titleLaser induced surface modifications of PDMS as a bio-compatible materialen_US
dc.typeThesisen_US
Appears in Collections:Environment
Institute for the Environment

Files in This Item:
File Description SizeFormat 
FulltextThesis.pdf24.05 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.