Please use this identifier to cite or link to this item:
|Title:||Active disassembly applied to end of life vehicles|
|Publisher:||Brunel University School of Engineering and Design PhD Theses|
|Abstract:||Active Disassembly is technology that has been developed to allow assemblies to readily separate for recycling when they are exposed to certain triggering conditions. It is based around fasteners that use `Smart' Materials, typically Shape Memory Alloys (SMA) or Shape Memory Polymers (SMP). This has led to research in the field to be known as Active Disassembly Using Smart Materials (ADSM). Particularly within the context of the EU End of Life Vehicle (ELV) legislation, ADSM has the potential to enable the achievement of the recycling levels required. In this thesis, active disassembly solutions have been developed which have focused on the disassembly of the Instrument Panel, and the glazing within a vehicle. To achieve this, a number of novel Smart fastening devices have been developed, two of which are triggered by integral heating elements. This investigation also led to the creation of a new releasable hook and loop fastening system, known as `Shape Memory Hook and Loop Fasteners' (SM-HALF). SM-HALF is a repositionable fastening system that can be released remotely under a thermal stimulus. Research into the residual energy content of ELV batteries has been a significant part of the investigation. It has been found that it is possible to use the energy from `dead' car batteries to power at least 16 shape-memory alloy devices constructed from 25-micron diameter wire, at End of Life. No external energy input is required for disassembly. This research is timely as it provides a means of reclaiming 10% of a vehicle that would otherwise be lost to the shredder. The technology can: increase the number of parts available for recycling and reuse, separate waste streams, decrease shredder residue otherwise destined for landfill and increase economic returns for either the vehicle dismantling yards or shredder operator.|
|Description:||This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.|
|Appears in Collections:||Design|
Dept of Design Theses
Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.