Collection's Items (Sorted by Submit Date in Descending order): 2501 to 2550 of 2708
| Issue Date | Title | Author(s) |
| 2010 | Sustainable development strategies for product provision and manufacturing approaches | De Coster, R; Bateman, RJ; Plant, AVC |
| 2008 | The near wall effect of synthetic jets in a boundary layer | Jabbal, M; Zhong, S |
| 2006 | The performance of round synthetic jets in quiescent flow | Jabbal, M; Wu, J; Zhong, S |
| 2011 | Running characteristics of aerodynamic bearing with self-lifting capability at low rotational speed | Stolarski, TA |
| 2008 | Design and assessment of a multiple sensor fault tolerant robust control system | Yang, SS; Chen, J |
| 2011 | Numerical simulation of solid tumor blood perfusion and drug delivery during the “vascular normalization window” with antiangiogenic therapy | Lv, J; Cao, J; Cai, Y; Zhou, Y; Long, Q; Yao, W; Xu, S |
| 2010 | Particle image velocimetry measurements of the interaction of synthetic jets with a zero-pressure gradient laminar boundary layer | Jabbal, M; Zhong, S |
| 2011 | Compound effect of EHD and surface roughness in pool boiling and CHF with R-123 | Ahmad, SW; Karayiannis, TG; Kenning, DBR; Luke, A |
| 2004 | Adaptive two-pass rank order filter to remove impulse noise in highly corrupted images | Xu, X; Miller, E L; Chen, D; Sarhadi, M |
| 2010 | Estimating sailplane mass properties | Hoff, RI; Gratton, GB; Gee, AE |
| 2004 | Dimensional instability of cement bonded particleboard: Modelling CBPB as a composite of two materials | Fan, M; Dinwoodie, JM; Bonfield, PW; Breese, MC |
| 2004 | Dimensional instability of cement bonded particleboard - Part 2: Behaviour and its prediction under cyclic changes in RH | Fan, M; Dinwoodie, JM; Bonfield, PW; Breese, MC |
| 1997 | Supply chain control: Trade-offs and system requirements | Leach, NP; Makatsoris, C; Richards, HD |
| 2010 | An evaluation of the historical issues associated with achieving non-helicopter V/STOL capability and the search for the flying car | Saeed, B; Gratton, GB |
| 1983 | A curvilinear snake arm robot with gripper-axis fibre-optic image processor feedback | Taylor, W K; Lavie, D; Esat, II |
| 1999 | Dimensional instability of cement bonded particleboard: Behaviour of wood chips from various stages of manufacture of CBPB | Fan, M; Dinwoodie, JM; Bonfield, PW; Breese, MC |
| 2000 | Dimensional instability of cement bonded particleboard: SEM and image analysis | Fan, M; Bonfield, PW; Dinwoodie, JM; Breese, MC |
| 2009 | Process for making composite products | Fan, M; Bonfield, PW |
| 2007 | Process for making composite products | Fan, M; Bonfield, PW |
| 2007 | Process for making composite products from fibrous waste material | Fan, M; Bonfield, PW |
| 2011 | A collaborative approach to forecasting product–service systems (PSS) | De Coster, R |
| 2009 | Potential of heat pipe technology in nuclear seawater desalination | Jouhara, H; Anastasov, V; Khamis, I |
| 2009 | Modelling and simulation techniques for forced convection heat transfer in heat sinks with rectangular fins | Jouhara, H; Axcell, BP |
| 2009 | Design optimisation of air-fed full pressurised suits | Edwards, P; Tesch, K; Karayiannis, TG; Collins, MW; Atherton, MA; Young, P; Large, M; Brade, R |
| 2009 | Film boiling heat transfer and vapour film collapse on spheres, cylinders and plane surfaces | Jouhara, H; Axcell, BP |
| 2011 | Modelling of two-component turbulent mass and heat transfer in air-fed pressurised suits | Tesch, K; Collins, MW; Karayiannis, TG; Atherton, MA; Edwards, P |
| 2010 | Investigation of split injection in a single cylinder optical diesel engine | Diez, A; Zhao, H |
| 2010 | Beyond the virtual intracranial stenting challenge 2007: non-Newtonian and flow pulsatility effects | Cavazzuti, M; Atherton, MA; Collins, MW; Barozzi, G |
| 2010 | Experimental investigation of small diameter two-phase closed thermosyphons charged with water, FC-84, FC-77 and FC-3283 | Jouhara, H; Robinson, AJ |
| 2010 | Combustion characteristics of CAI combustion with alcohol fuels | Tongroon, M; Zhao, H |
| 2008 | Machining dynamics: Fundamentals, applications and practices | Cheng, K |
| 2010 | Modal validation of a cantilever-plate bimorph actuator illustrating sensitivity to 3D characterisation | Oldfield, MJ; Atherton, MA; Bates, RA; Perry, MA; Wynn, HP |
| 2010 | A low cost air hybrid concept | Lee, CY; Zhao, H; Ma, T |
| 2010 | Experimental investigation on micromilling of oxygen-free, high-conductivity copper using tungsten carbide, chemistry vapour deposition and single-crystal diamond micro tools | Huo, D; Cheng, K |
| 2009 | Economic assessment of the benefits of wraparound heat pipes in ventilation processes for hot and humid climates | Jouhara, H |
| 2001 | Research and development of Controlled Auto-Ignition (CAI) combustion in a 4-stroke multi-cylinder gasoline engine | Li, J; Zhao, H; Ladommatos, N; Ma, T |
| 2002 | Performance and analysis of a 4-stroke multi-cylinder gasoline engine with CAI combustion | Zhao, H; Li, J; Ma, T; Ladommatos, N |
| 2001 | Dilution effects on the controlled auto-ignition (CAI) combustion of hydrocarbon and alcohol fuels | Oakley, A; Zhao, H; Ma, T; Ladommatos, N |
| 2008 | CAI combustion with methanol and ethanol in an air-assisted direct injection SI engine | Li, Y; Zhao, H; Brouzos, NP |
| 2008 | Investigation of transition between spark ignition and controlled auto-ignition combustion in a V6 direct-injection engine with cam profile switching | Kalian, N; Zhao, H; Qiao, J |
| 2005 | Characteristics of homogeneous charge compression ignition (HCCI) combustion and emissions of n-heptane | Peng, Z; Zhao, H; Ma, T; Ladommatos, N |
| 2003 | Visualization of the homogeneous charge compression ignition/controlled autoignition combustion process using two-dimensional planar laser-induced fluorescence imaging of formaldehyde | Peng, Z; Zhao, H; Ladommatos, N |
| 2010 | Multi-scale simulation of the nano-metric cutting process | Sun, X; Cheng, K |
| 2009 | Design of a five-axis ultra-precision micro-milling machine—UltraMill. Part 2: Integrated dynamic modelling, design optimisation and analysis | Huo, D; Cheng, K; Wardle, F |
| 2009 | Design of a five-axis ultra-precision micro-milling machine—UltraMill. Part 1: Holistic design approach, design considerations and specifications | Huo, D; Cheng, K; Wardle, F |
| 2009 | A holistic integrated dynamic design and modelling approach applied to the development of ultraprecision micro-milling machines | Huo, D; Cheng, K; Wardle, F |
| 2008 | Geomorphological insight into changing tectonic regime, Pasinler Basin, Turkey | Collins, PEF; Rust, DJ; Bayraktutan, MS |
| 2010 | An overview of recent applications of computational modelling in neonatology | Wrobel, LC; Ginalski, MK; Nowak, AJ; Ingham, DB; Fic, AM |
| 2005 | Automating the determination of wave speed using the pu-loop method | Swalen, MJP; Khir, AW |
| 2009 | Determination of wave speed and distensibility of flexible tubes using diameter and velocity | Li, Y; Khir, AW |
Collection's Items (Sorted by Submit Date in Descending order): 2501 to 2550 of 2708
