Please use this identifier to cite or link to this item:
Title: On the high strain rate behavior of 63-37 Sn-Pb eutectic solders with temperature effects
Authors: Iqbal, N
Xue, P
Wang, B
Li, Y
Keywords: Eutectic solders;JC model;SHPB;Strain rate;Transient temperature
Issue Date: 2014
Publisher: Elsevier Ltd
Citation: International Journal of Impact Engineering, 74 pp. 126 - 131, 2014
Abstract: This study presents experimental results performed on samples of Eutectic solder material (63 wt. % Sn 37 wt. % Pb) loaded at high strain rates and elevated temperatures. The tests were performed at high strain rates using Split Hopkinson Pressure Bar (SHPB). The strain rates were in the range of 400 s-1to 1300 s-1. Heating unit was added to conventional SHPB to vary sample' s initial temperature conditions. Tests were conducted at three initial temperatures, i.e. room temperature, 60 °C and 120 °C for compressive mode. The effects of temperature on the behavior of material were compared. Transient temperature changes during dynamic loading conditions are calculated by an analytical approach using measured stress-strain data for plastic work. Test results were fitted into the Johnson-Cook model (JC model). In addition, dynamic tests were performed in tension mode using Split Hopkinson Tensile Bar (SHTB) at room temperature.
ISSN: 0734-743X
Appears in Collections:Brunel Design School Research Papers

Files in This Item:
File Description SizeFormat 
Fulltext.pdf361.52 kBAdobe PDFView/Open

Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.