Please use this identifier to cite or link to this item:
http://bura.brunel.ac.uk/handle/2438/11895
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Ji, S | - |
dc.contributor.author | Yang, H | - |
dc.contributor.author | Watson, D | - |
dc.contributor.author | Fan, Z | - |
dc.coverage.spatial | Nashville, Tennessee | - |
dc.coverage.spatial | Nashville, Tennessee | - |
dc.date.accessioned | 2016-01-22T10:46:07Z | - |
dc.date.available | 2016-01-22T10:46:07Z | - |
dc.date.issued | 2016 | - |
dc.identifier.citation | Light Metals -Warrendale- Proceedings, TMS, Nashville, Tennessee, 14-18 February 2016 | en_US |
dc.identifier.issn | 0147-0809 | - |
dc.identifier.uri | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/597E4E2483F1733985257E69003D4F11?OpenDocument | - |
dc.identifier.uri | http://bura.brunel.ac.uk/handle/2438/11895 | - |
dc.description.abstract | The Weibull statistical model with three parameters has been used to assess the repeatability of the high pressure die-castings made by an Al-Mg-Si-Mn alloy. It was found that the round samples had a maximum Weibull modulus, indicating the best repeatability. The machined samples exhibited the second best of Weibull modulus. Among the square samples, the 2 mm thick samples had the lowest and the 5 mm thick samples had the highest Weibull modulus, indicating that the repeatability was worsened for the castings with thinner wall thickness. The microstructural uniformity and porosity levels are critical factors in determining the repeatability of high pressure die-castings. | en_US |
dc.description.sponsorship | Engineering and Physical Sciences Research Council (EPSRC), Technology Strategy Board (TSB) and Jaguar Land Rover (JLR) in United Kingdom | en_US |
dc.language.iso | en | en_US |
dc.publisher | TMS USA | en_US |
dc.source | TMS 2016 | - |
dc.source | TMS 2016 | - |
dc.subject | Aluminium alloys | en_US |
dc.subject | Casting | en_US |
dc.subject | Mechanical property | en_US |
dc.subject | Microstructure | en_US |
dc.subject | Weibull analysis | en_US |
dc.title | Wiebull analysis for the repeatibility of die castings made by an al-mg-si-mn alloy | en_US |
dc.type | Conference Paper | en_US |
pubs.finish-date | 2016-02-18 | - |
pubs.finish-date | 2016-02-18 | - |
pubs.publication-status | Published | - |
pubs.publication-status | Published | - |
pubs.start-date | 2016-02-14 | - |
pubs.start-date | 2016-02-14 | - |
Appears in Collections: | Brunel Centre for Advanced Solidification Technology (BCAST) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Fulltext.docx | 3.02 MB | Unknown | View/Open |
Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.