Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/1319
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKang, J-
dc.contributor.authorHadfield, M-
dc.coverage.spatial10en
dc.date.accessioned2007-11-19T11:41:18Z-
dc.date.available2007-11-19T11:41:18Z-
dc.date.issued2001-
dc.identifier.citationKang, J. and Hadfield, M., “Parameter optimization by Taguchi Methods for finishing advanced ceramic balls using a novel eccentric lapping machine” Journal of Engineering Manufacture, Proceedings of Institution of Mechanical Engineers, Part B, Vol. 215, No. B1, 2001, pp. 69-78en
dc.identifier.issn0954-4054-
dc.identifier.urihttp://bura.brunel.ac.uk/handle/2438/1319-
dc.description.abstractThe final finishing process of advanced ceramic balls used in hybrid precision bearings constitutes two-thirds of the total manufacturing cost, and hence effective and economic finishing methods and processes are critical to their widespread application. A novel eccentric lapping machine is designed and manufactured. Hot isostatically pressed silicon nitride ball blanks (diameter 13.25 mm) are used to investigate the feasibility of accelerating the ball finishing process while maintaining high surface quality. Taguchi methods are used during the first step of finishing to optimize lapping parameters; the L9 (3(4)) four-parameter, three-level orthogonal array is used to design the experiment. Experimental results reveal that this novel eccentric lapping method is very promising; a material removal rate of 40 mum/h is achievable. The optimum lapping condition is found to be high speed, high load and high paste concentration with 60 mum diamond particles. The analysis of variance shows that the most significant lapping parameter is lapping load, which accounts for 50 per cent of the total, followed by lapping speed (31 per cent); the particle size and paste concentration only account for 12 per cent and 7 per cent respectively. A comparison with previous lapping experiments and the mechanism of material removal are also discussed briefly.en
dc.format.extent239133 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.publisherProfessional Engineering Publishing (Institution of Mechanical Engineers)en
dc.subjectlappingen
dc.subjectpolishingen
dc.subjectfinishingen
dc.subjecteccentric lappingen
dc.subjectceramic ball finishingen
dc.subjectTaguchi methodsen
dc.subjectsilicon nitrideen
dc.subjecthybrid bearingsen
dc.titleParameter optimization by Taguchi Methods for finishing advanced ceramic balls using a novel eccentric lapping machineen
dc.typeResearch Paperen
dc.identifier.doihttps://doi.org/10.1243/0954405011515145-
Appears in Collections:Design
Mechanical and Aerospace Engineering
Brunel Design School Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf233.53 kBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.