Please use this identifier to cite or link to this item:
http://bura.brunel.ac.uk/handle/2438/1409
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Zolgharni, M | - |
dc.contributor.author | Jones, BJ | - |
dc.contributor.author | Bulpett, R | - |
dc.contributor.author | Anson, AW | - |
dc.contributor.author | Franks, J | - |
dc.date.accessioned | 2007-12-14T16:27:04Z | - |
dc.date.available | 2007-12-14T16:27:04Z | - |
dc.date.issued | 2007 | - |
dc.identifier.citation | Diamond & Related Materials 17: 1733, Dec 2007 | en |
dc.identifier.issn | 0925-9635 | - |
dc.identifier.other | doi: 10.1016/j.diamond.2007.11.012 | - |
dc.identifier.uri | http://bura.brunel.ac.uk/handle/2438/1409 | - |
dc.description.abstract | We demonstrate enhancements of performance and energy efficiency of cutting tools by deposition of diamond-like carbon (DLC) coatings on machine parts. DLC was deposited on steel drill bits, using plasma enhanced chemical vapour deposition (PECVD) with the acetylene precursor diluted with argon, to produce a surface with low friction and low wear rate. Drill bit performance in dry drilling of aluminium was quantified by analysis of power consumption and swarf flow. Optimised deposition conditions produced drill bits with greatly enhanced performance over uncoated drill bits, showing a 25% reduction in swarf clogging, a 36% reduction in power consumption and a greater than five-fold increase in lifetime. Surface analysis with scanning electron microscopy shows that DLC coated drills exhibit much lower aluminium build up on the trailing shank of the drill, enhancing the anti-adhering properties of the drill and reducing heat generation during operation, resulting in the observed improvements in efficiency. Variation of drilling efficiency with argon dilution of precursor is related to changes in the microstructure of the DLC coating. | en |
dc.format.extent | 421307 bytes | - |
dc.format.mimetype | application/pdf | - |
dc.language.iso | en | - |
dc.publisher | Elsevier BV | en |
dc.relation.ispartof | Experimental Techniques Centre (ETC); | - |
dc.subject | Cutting tools | en |
dc.subject | Plasma CVD | en |
dc.subject | Diamond-like carbon | en |
dc.subject | Surface Characterization | en |
dc.title | Energy Efficiency Improvements in Dry Drilling with Optimised Diamond-Like Carbon Coating | en |
dc.type | Research Paper | en |
Appears in Collections: | Materials Engineering The Experimental Techniques Centre Dept of Mechanical and Aerospace Engineering Research Papers |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
MZ-DLC-Drills-archive.pdf | 411.43 kB | Adobe PDF | View/Open |
Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.