Please use this identifier to cite or link to this item:
Title: Planar laser induced fluorescence imaging and analysis with ethanol blended fuels in a direct injection spark ignition engine
Other Titles: PLIF of ethanol blended fuels in a DISI engine
Authors: Liu, Quan
Advisors: Cairns, A
Zhao, H
Keywords: Optical DISI engine;Single cylinder engine;Charge homogeneity;Cyclic variations;Particulates
Issue Date: 2017
Publisher: Brunel University London
Abstract: The currently reported thesis was concerned with visualisation of the charge homogeneity and cyclic variations within the planar fuel field near the spark plug in an optical spark ignition engine fitted with an outwardly opening central direct fuel injector. Specifically, the project examined the effects of fuel type and injection settings, with the overall view to understanding some of the key mechanisms previously identified as leading to particulate formation in such engines. The three fuels studied included a baseline iso-octane, which was directly compared to two gasoline fuels containing 10% (E10) and 85% (E85) volume of ethanol respectively. The engine was a bespoke single cylinder with Bowditch style optical access through a flat piston crown. Charge stratification was studied over a wide spectrum of injection timings using the Planar Laser Induced Fluorescence (PLIF) technique, with additional variation in charge temperature due to injection also estimated when viable using a two-line PLIF approach. Overall, both gasoline-ethanol fuels generally exhibited a higher degree of stratification, albeit at least partly alleviated with elevated rail pressures. Under both warm and cold liner conditions the E10 fuel showed clear evidence of fuel droplets persisting up until ignition. Interestingly, with late injection timing the repeatability of the injection was superior (statistically) with higher ethanol content in the fuel, which may have been associated with the higher charge temperatures aiding control of the evaporation of the main mass of alcohol. The findings were corroborated by undertaking a comprehensive study of the influence of varying fuel type and injection settings on thermodynamic performance and engine-out emissions during firing operation, with additional gas exchange effects also influencing the optimum fuel injection timings.
Description: This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London
Appears in Collections:Mechanical and Aerospace Engineering
Dept of Mechanical Aerospace and Civil Engineering Theses

Files in This Item:
File Description SizeFormat 
FulltextThesis.pdf4.76 MBAdobe PDFView/Open

Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.