Please use this identifier to cite or link to this item:
http://bura.brunel.ac.uk/handle/2438/1617
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Johnson, R | - |
dc.contributor.author | Yang, QP | - |
dc.contributor.author | Butler, C | - |
dc.coverage.spatial | 5 | en |
dc.date.accessioned | 2008-02-11T16:40:09Z | - |
dc.date.available | 2008-02-11T16:40:09Z | - |
dc.date.issued | 1998 | - |
dc.identifier.citation | IEEE Transactions on Instrumentation and Measurement. 47 (5): 1168-1172 | en |
dc.identifier.issn | 0018-9456 | - |
dc.identifier.uri | http://bura.brunel.ac.uk/handle/2438/1617 | - |
dc.description.abstract | This paper discusses the dynamic error characteristics of touch trigger probes used with coordinate measuring machines. During the investigation, a number of important parameters have been identified, including measurement speed, probe longitude, approach distance, probe latitude, stylus length/stylus tip diameter, probe orientation, operating mode (scanning and nonscanning), scan pitch, preload spring force (gauging force), probe type, and the surface approach angle. This paper presents the detailed experimental design and the results obtained from the systematic experiments. These results have led to some useful recommendations for the reduction of the probe dynamic errors. Some of these recommendations included the selection of the optimum measurement speed, the setting of the preload spring force, and the choice of the probe type. | en |
dc.format.extent | 207964 bytes | - |
dc.format.mimetype | application/pdf | - |
dc.language.iso | en | - |
dc.publisher | Brunel University | en |
dc.relation.ispartof | 47; | - |
dc.subject | Dynamics | en |
dc.subject | Error analysis | en |
dc.subject | Inspection | en |
dc.subject | Measuremeasurement | en |
dc.subject | Position measurement | en |
dc.subject | Transducers | en |
dc.title | Dynamic error characteristics of touch trigger probes used with coordinate measuring machines | en |
dc.type | Conference Paper | en |
dc.identifier.doi | http://dx.doi.org/10.1109/19.746577 | - |
Appears in Collections: | Advanced Manufacturing and Enterprise Engineering (AMEE) Dept of Mechanical and Aerospace Engineering Research Papers |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Dynamic error characteristics of touch trigger probes fitted to coordinate measuring machines.pdf | 203.09 kB | Adobe PDF | View/Open |
Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.