Please use this identifier to cite or link to this item:
Title: Erratum to: A Study of Metal Free Supercapacitors Using 3D Printing (International Journal of Precision Engineering and Manufacturing, (2018), 19, 7, (1071-1079), 10.1007/s12541-018-0127-7)
Authors: Tanwilaisiri, A
Xu, Y
Harrison, D
Fyson, J
Arier, M
Keywords: 3D printing;Metal free supercapacitors;Carbon conductive paint;Electrode thickness;Energy storage device
Issue Date: 2018
Publisher: Springer Verlag
Citation: International Journal of Precision Engineering and Manufacturing, 2018, 19 (8)
Abstract: Metal-free supercapacitors were designed and fabricated using a 3D printing process. An attempt was made to use carbon conductive paint to create both current collector and electrode. Two 3D printing techniques were combined and used to manufacture the electric double layer capacitors (EDLCs). The electrode material made from carbon conductive paint and distilled water showed a good electrical performance. The manufacturing process for the EDLCs has been explained in detail and the process showed a good reproducibility. Different thicknesses of electrode were tested and characterized. The results showed that both the mass of the electrode material and the capacitance of the supercapacitor increased as the thickness of the active layer increased. The thickness of the electrode increased 4 times from 0.5 mm to 2.0 mm, the mass of the electrode material increased nearly 3 times from 0.514 g to 1.498 g, which resulted in the increase of capacitance from 0.133 F to 0.295 F
ISSN: 2234-7593
Appears in Collections:Dept of Design Embargoed Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf1.11 MBAdobe PDFView/Open

Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.