Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNandi, AK-
dc.contributor.authorNakhli Mahal, H-
dc.contributor.authorYang, K-
dc.identifier.citationApplied Sciencesen_US
dc.description.abstractIn the past decade, guided-wave testing has attracted the attention of the non-destructive testing industry for pipeline inspections. This technology enables the long-range assessment of pipelines’ integrity, which significantly reduces the expenditure of testing in terms of cost and time. Guided-wave testing collars consist of several linearly placed arrays of transducers around the circumference of the pipe, which are called rings, and can generate unidirectional axisymmetric elastic waves. The current propagation routine of the device generates a single time-domain signal by doing a phase-delayed summation of each array element. The segments where the energy of the signal is above the local noise region are reported as anomalies by the inspectors. Nonetheless, the main goal of guided-wave inspection is the detection of axisymmetric waves generated by the features within the pipes. In this paper, instead of processing a single signal obtained from the general propagation routine, we propose to process signals that are directly obtained from all of the array elements. We designed an axisymmetric wave detection algorithm, which is validated by laboratory trials on real-pipe data with two defects on different locations with varying cross-sectional area (CSA) sizes of 2% and 3% for the first defect, and 4% and 5% for the second defect. The results enabled the detection of defects with low signal-to-noise ratios (SNR), which were almost buried in the noise level. These results are reported with regard to the three different developed methods with varying excitation frequencies of 30 kHz, 34 kHz, and 37 kHz. The tests demonstrated the advantage of using the information received from all of the elements rather than a single signal.en_US
dc.description.sponsorshipBrunel University London and National Structural Integrity Research Centre (NSIRC)en_US
dc.subjectSignal processingen_US
dc.subjectDefect detectionen_US
dc.subjectSpatial domainen_US
dc.subjectArray analysisen_US
dc.subjectPipeline inspectionen_US
dc.subjectUltrasonic guided waves (UGWs)en_US
dc.titleDetection of defects using spatial variances of guided wave modes in testing of pipesen_US
dc.relation.isPartOfApplied Sciences-
Appears in Collections:Dept of Economics and Finance Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf7.69 MBAdobe PDFView/Open

Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.