Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/17492
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKarakulak, E-
dc.contributor.authorKüçüker, YB-
dc.date.accessioned2019-02-14T12:10:28Z-
dc.date.available2018-12-01-
dc.date.available2019-02-14T12:10:28Z-
dc.date.issued2018-09-17-
dc.identifier.citationJournal of Magnesium and Alloys, 2018, 6 (4), pp. 384 - 389en_US
dc.identifier.issn2213-9567-
dc.identifier.issnhttp://dx.doi.org/10.1016/j.jma.2018.08.004-
dc.identifier.urihttp://bura.brunel.ac.uk/handle/2438/17492-
dc.description.abstractEffect of Si addition on microstructure, hardness and wear resistance of as cast Mg-5Sn and Mg-10Sn alloys were investigated. For this purpose alloys with wt.-% 0, 0.5, 1, 1.5 Si were cast using an induction furnace. Addition of Si to both alloys caused an increasement in the amount of intermetallic phases at the grain boundaries. Also refined grain structure was reported with increasing Si content in the cast alloys. Both increased amount of intermetallics and decreased grain size caused an increase in the hardness of the alloys. Wear resistance of the binary alloys first increased with Si addition and then decreased. Increased amounts of Si in the alloys caused crack formation during wear tests and decreased wear resistance. Sliding speed also has a dramatical effect on the wear resistance of the alloys. Increased sliding speed resulted with higher wear resistance. Worn surfaces of the alloys also investigated under scanning electron microscope to understand the wear mechanisms operated during wear tests.en_US
dc.format.extent384 - 389-
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.subjectMagnesiumen_US
dc.subjectCastingen_US
dc.subjectMicrostructureen_US
dc.subjectHardnessen_US
dc.subjectWearen_US
dc.titleEffect of Si addition on microstructure and wear properties of Mg-Sn as-cast alloysen_US
dc.typeArticleen_US
dc.identifier.doihttp://dx.doi.org/10.1016/j.jma.2018.08.004-
dc.relation.isPartOfJournal of Magnesium and Alloys-
pubs.issue4-
pubs.publication-statusPublished-
pubs.volume6-
Appears in Collections:Dept of Mechanical Aerospace and Civil Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf3.2 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.