Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/1772
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHarrison, DJ-
dc.contributor.authorBillett, EH-
dc.contributor.authorBillingsley, J-
dc.coverage.spatial2en
dc.date.accessioned2008-03-03T12:10:18Z-
dc.date.available2008-03-03T12:10:18Z-
dc.date.issued1995-
dc.identifier.citationProceedings of IEE/IEEE International Conference on Clean Electronics. Edinburgh, Oct. 1995, pp 174-176.en
dc.identifier.isbn0-85296-651-2-
dc.identifier.urihttp://bura.brunel.ac.uk/handle/2438/1772-
dc.description.abstractThis paper proposes a novel technique for low cost circuit manufacture which it is hoped will offer significant reduction in environmental impact, both in terms of production process, and end of life. The technique is to use a pattern printed on paper by conventional offset lithographic techniques to form interconnection circuitry. Initial research is concentrating on the selection of appropriate conductive inks, and substrate materials. At present, components are attached using conductive adhesives, but the feasibility of placing components during the final printing pass, and using a form of conductive ink to provide the bond, is investigated.en
dc.format.extent186443 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.publisherIEEEen
dc.subjectenvironmental factors; integrated circuit interconnections; integrated circuit manufacture; lithography; paper; substratesen
dc.titleNovel Circuit Fabrication Techniques for Reduced Environmental Impacten
dc.typeConference Paperen
Appears in Collections:Design
Dept of Design Research Papers

Files in This Item:
File Description SizeFormat 
Novel Circuit Fabrication Techniques for Reduced Environmental Impact.pdf182.07 kBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.