Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/30903
Full metadata record
DC FieldValueLanguage
dc.contributor.authorParupudi, RV-
dc.contributor.authorRedpath, D-
dc.contributor.authorSingh, H-
dc.contributor.authorJalali, MR-
dc.contributor.authorKolokotroni, M-
dc.date.accessioned2025-03-13T18:14:33Z-
dc.date.available2025-03-13T18:14:33Z-
dc.date.issued2024-08-07-
dc.identifierORCiD: Harjit Singh https://orcid.org/0000-0003-3448-1175-
dc.identifierORCiD: Mohammad Reza Jalali https://orcid.org/0000-0001-8708-3811-
dc.identifierORCiD: Maria Kolokotroni https://orcid.org/0000-0003-4478-1868-
dc.identifierArticle no. 011007-
dc.identifier.citationParupudi, R.V. et al. (2025) 'Low Concentrating Photovoltaic Geometry for Retrofitting Onto European Building Stock', Journal of Solar Energy Engineering, 147 (1), 011007, pp. 1 - 8. doi: 10.1115/1.4065980.en_US
dc.identifier.issn0199-6231-
dc.identifier.urihttps://bura.brunel.ac.uk/handle/2438/30903-
dc.description.abstractThe most appropriate low concentrating photovoltaic (LCPV) technology suitable for European buildings located in mid-high latitudes under both maritime and continental climatic conditions has been identified as the asymmetric compound parabolic concentrator (ACPC). To date, there is no published experimental data at different latitudes on the long-term performance of these systems at these latitudes nor how location would modify the optical characteristics of deployed systems. Previous theoretical research by the authors has demonstrated the superiority of the ACPC with this additional work experimentally confirming the robustness of the design. To investigate how seasonal and locational variations affect their measured technical performance two identical ACPC-LCPVs were installed, instrumented, and monitored at two different climatic locations (Uxbridge, UK, and Vevey, Switzerland) from May 2020 to September 2020. A valid comparative performance investigation characterizing two geometrically equivalent ACPC-based LCPV systems using real-life experimental data collected is presented in this paper. Locations at higher latitudes experience greater transverse angles more frequently compared to locations nearer the equator making ACPC geometries more appropriate than symmetrical concentrator configurations for building retrofit. This is shown in this paper over a latitudinal expanse of 31.35 deg for four separate locations; Tessalit (20.19 deg N, 1.00 deg E; Mali), Timimoun (28.03 deg N, 1.65 deg E; Algeria), Uxbridge (51.54 deg N, 0.48 deg E, UK), and Vevey (46.6 deg N, 6.84 deg E, Switzerland).en_US
dc.description.sponsorshipThis project has received funding from the European Union’s H2020 research and innovation programme under grant agreement no 768576 (ReCO2ST project). David Redpath acknowledges the funding received from the Bryden Centre project (91) which was supported by the European Union’s INTERREG VA Programme, managed by the Special EU Programmes Body (SEUPB).en_US
dc.format.extent1 - 8-
dc.languageEnglish-
dc.language.isoen_USen_US
dc.publisherThe American Society of Mechanical Engineersen_US
dc.rightsAttribution 4.0 International-
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/-
dc.subjectasymmetric compound parabolic concentrating (ACPC)en_US
dc.subjectcompound parabolic concentrating (CPC)en_US
dc.subjectv-trough and buildingsen_US
dc.subjectclean energyen_US
dc.subjectcollectoren_US
dc.subjectopticsen_US
dc.subjectparabolic troughen_US
dc.subjectphotovoltaicsen_US
dc.subjectradiationen_US
dc.subjectrenewableen_US
dc.subjectsolaren_US
dc.subjectsolar reactoren_US
dc.titleLow Concentrating Photovoltaic Geometry for Retrofitting Onto European Building Stocken_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.1115/1.4065980-
dc.relation.isPartOfJournal of Solar Energy Engineering-
pubs.issue1-
pubs.publication-statusPublished online-
pubs.volume147-
dc.identifier.eissn1528-8986-
dc.rights.licensehttps://creativecommons.org/licenses/by/4.0/legalcode.en-
dcterms.dateAccepted2024-07-08-
dc.rights.holderASME-
Appears in Collections:Dept of Mechanical and Aerospace Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdfCopyright © 2024 by ASME. This document is made available in line with publisher policy and may differ from the published version. Please cite the published version where possible. Copyright and all moral rights to the version of the paper presented here belong to the individual author(s) and/or other copyright owners unless otherwise stated.; reuse license: Attribution 4.0 International (CC-BY) https://creativecommons.org/licenses/by/4.0/ (see: https://www.asme.org/publications-submissions/journals/information-for-authors/open-access).800.62 kBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons