Please use this identifier to cite or link to this item: https://bura.brunel.ac.uk/handle/2438/34197
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBachguar, Imane-
dc.contributor.authorMouhat, Ouadia-
dc.contributor.authorShamass, Rabee-
dc.date.accessioned2026-11-18T10:51:06Z-
dc.date.available2026-11-18T10:51:06Z-
dc.date.issued2026-11-14-
dc.identifier.citationBachguar, I., Mouhat, O. and Shamass, R. (2026) 'Numerical Investigation and Model Recalibration for Web-Post Buckling of Stainless Steel Cellular Beams', Metals, 16(11), 1252, pp. 1โ€“20. doi: 10.3390/met16111252.en_US
dc.identifier.urihttps://bura.brunel.ac.uk/handle/2438/34197-
dc.descriptionData Availability Statement: The data presented in this study are available from the corresponding author on reasonable request.en_US
dc.description.abstractSteel cellular beams have become widely used in construction projects, particularly for long-span structures. This work focuses on stainless steel, which exhibits a nonlinear stressโ€“strain behavior from low strain levels, without a well-defined yield plateau. Its conventional yield strength is determined at 0.2% plastic strain, followed by significant and continuous strain hardening up to failure. This mechanical characteristic directly affects the buckling resistance of structural elements, requiring the consideration of the variable tangent modulus ๐˜Œโ‚œ in design models. In the absence of experimental tests on stainless steel cellular beams, a finite element model was developed and validated using tests carried out on carbon steel beams. An extensive parametric study was then conducted to analyze the influence of geometry and material characteristics. In total, the analysis involved 1400 finite element models. Based on these results, the strut model was validated for the seven stainless steel grades considered. Subsequently, recalibrated values of the coefficient ๐˜Šโ‚‚ were proposed and made it possible to adjust the tangent modulus ๐˜Œโ‚œ in the theoretical model. The new recalibrated coefficients are directly applicable to design formulations and extend the scope of application of the strut model to stainless steel cellular beams, with good predictive accuracy.en_US
dc.description.sponsorshipThis research received no external funding.en_US
dc.format.extentpp. 1โ€“20-
dc.format.mediumElectronic-
dc.languageEnglish-
dc.language.isoen_USen_US
dc.publisherMDPIen_US
dc.rightsRe-use licence for this version: Creative Commons Attribution 4.0 International-
dc.rightsLicence for published version: Creative Commons Attribution 4.0 International-
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/-
dc.subjectcellular beamsen_US
dc.subjectstainless steelen_US
dc.subjectweb-post bucklingen_US
dc.subjectfinite element analysisen_US
dc.subjectcoefficient recalibrationen_US
dc.subject.other0914 Resources Engineering and Extractive Metallurgy-
dc.titleNumerical Investigation and Model Recalibration for Web-Post Buckling of Stainless Steel Cellular Beamsen_US
dc.typeArticleen_US
dc.date.dateAccepted2026-11-12-
dc.identifier.doihttps://doi.org/10.3390/met16111252-
dc.relation.isPartOfMetals-
pubs.issue11-
pubs.publication-statusPublished online-
pubs.volume16-
dc.identifier.eissn2075-4701-
dc.rights.licensehttps://creativecommons.org/licenses/by/4.0/legalcode.en-
dcterms.dateAccepted2026-11-12-
dcterms.issued2026-11-14-
dc.date.updated2026-11-18T10:47:55Z-
dc.rights.holderThe authors-
dc.contributor.orcidShamass, Rabee [0000-0002-7990-8227]-
dc.identifier.number1252-
Appears in Collections:Department of Civil and Environmental Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdfCopyright ยฉ 2026 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.5.51 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons