Please use this identifier to cite or link to this item:
https://bura.brunel.ac.uk/handle/2438/34199Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Asil, Abdul Radim | - |
| dc.contributor.author | Barekar, Nilam S | - |
| dc.contributor.author | Barbatti, Carla | - |
| dc.contributor.author | Eskin, Dmitry G | - |
| dc.date.accessioned | 2026-11-18T12:36:34Z | - |
| dc.date.available | 2026-11-18T12:36:34Z | - |
| dc.date.issued | 2026-11-11 | - |
| dc.identifier.citation | Asil, A.R. et al. (2026) 'A Novel Method to Assess Aluminium Alloy Machinability Using Shear Cracks in Chips Formed During Machining', Journal of Manufacturing and Materials Processing, 10(11), 500, pp. 1–13. doi: 10.3390/jmmp10110500. | en_US |
| dc.identifier.uri | https://bura.brunel.ac.uk/handle/2438/34199 | - |
| dc.description | Data Availability Statement: The raw/processed data required to reproduce these findings cannot be shared at this time due to legal reasons and forms part of an ongoing study. | en_US |
| dc.description.abstract | Demand for aluminium (Al) products has increased due to their low density, high strength-to-weight ratio, thermal and electrical conductivity, and corrosion resistance. Reliable machinability assessment is important for selecting suitable alloys for manufacturing applications. However, conventional methods based on chip counting and weighing may not adequately distinguish alloys with similar chemical compositions. This study proposes an alternative method for assessing aluminium alloy machinability by quantifying the Shear Crack Initiation Layer (SCIL) in machining chips. Aluminium alloys were machined using a lathe under consistent machining parameters, and chip cross-sections were examined to quantify shear crack features and investigate differences between inner and outer chip layers. Conventional chip counting and weighing produced similar machinability values for two chemically similar alloys and showed negligible differences between the inner and outer layers of each alloy. In contrast, SCIL-based assessment revealed clear machinability differences between the inner and outer layers within each alloy and between the two chemically similar alloys. These findings demonstrate the potential of SCIL quantification to provide a more sensitive assessment of aluminium alloy machinability than conventional chip counting and weighing methods. | en_US |
| dc.description.sponsorship | UK Engineering and Physical Sciences Research Council (EPSRC Grant: Industrial CASE Account—Brunel University 2020, under grant number EP/V519480/1, project reference 2625304) | en_US |
| dc.description.sponsorship | Constellium, Ltd. | en_US |
| dc.format.extent | pp. 1–13 | - |
| dc.format.medium | Electronic | - |
| dc.language | English | en_US |
| dc.language.iso | en_US | en_US |
| dc.publisher | MDPI | en_US |
| dc.rights | Re-use licence for this version: Creative Commons Attribution 4.0 International | - |
| dc.rights | Licence for published version: Creative Commons Attribution 4.0 International | - |
| dc.rights.uri | https://creativecommons.org/licenses/by/4.0/ | - |
| dc.subject | machinability | en_US |
| dc.subject | shear cracks | en_US |
| dc.subject | chip morphology | en_US |
| dc.subject | chip formation | en_US |
| dc.subject | chip breakability | en_US |
| dc.subject | scanning electron microscopy | en_US |
| dc.title | A Novel Method to Assess Aluminium Alloy Machinability Using Shear Cracks in Chips Formed During Machining | en_US |
| dc.type | Article | en_US |
| dc.date.dateAccepted | 2026-11-09 | - |
| dc.identifier.doi | https://doi.org/10.3390/jmmp10110500 | - |
| dc.relation.isPartOf | Journal of Manufacturing and Materials Processing | en_US |
| pubs.issue | 11 | - |
| pubs.publication-status | Published online | - |
| pubs.volume | 10 | - |
| dc.identifier.eissn | 2504-4494 | - |
| dc.rights.license | https://creativecommons.org/licenses/by/4.0/legalcode.en | - |
| dcterms.dateAccepted | 2026-11-09 | - |
| dcterms.issued | 2026-11-11 | - |
| dc.date.updated | 2026-11-18T12:32:29Z | - |
| dc.rights.holder | The authors | - |
| dc.contributor.orcid | Asil, Abdul Radim [0009-0004-3901-9216] | - |
| dc.contributor.orcid | Barekar, Nilam S [0000-0002-8544-7455] | - |
| dc.contributor.orcid | Eskin, Dmitry [0000-0002-0303-2249] | - |
| dc.identifier.number | 500 | - |
| Appears in Collections: | Brunel Centre for Advanced Solidification Technology (BCAST) | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| FullText.pdf | Copyright © 2026 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license. | 13.85 MB | Adobe PDF | View/Open |
This item is licensed under a Creative Commons License