Please use this identifier to cite or link to this item:
http://bura.brunel.ac.uk/handle/2438/7612
Title: | Internally-cooled tools and cutting temperature in contamination-free machining |
Authors: | Ferri, C Minton, T Ghani, SBC Cheng, K |
Keywords: | Cutting temperature;Internally cooled tool;Contamination-free machining;Dry machining |
Issue Date: | 2013 |
Publisher: | Institution of Mechanical Engineers |
Citation: | Proceeding of the Institution of Mechanical Engineers, Part C, Online Paper, Mar 2013 |
Abstract: | Whilst machining heat is generated by the friction inherent into the sliding of the chip on the rake face of the insert, the temperature in the cutting zone of both the insert and the chip rises, facilitating adhesion and diffusion. These effects accelerate the insert wear, ultimately undermining the tool life. Therefore, a number of methods have been developed to control the heat generation. Most typically, metal working fluids are conveyed onto the rake face in the cutting zone, with negative implications on the contamination of the part. Many applications for instance in health care and optics are often hindered by this contamination. In this study, microfluidics structures internal to the insert were examined as a means of controlling the heat generation. Conventional and internally cooled tools were compared in dry turning of AA6082-T6 aluminium alloy in two 33 factorial experiments of different machining conditions. Statistical analyses supported the conclusion that the chip temperature depends only on the depth of cut but not on the feed rate or on the cutting speed. They also showed that the benefit of cooling the insert internally increases while increasing the depth of cut. Internally cooled tools can therefore be particularly advantageous in roughing operations. |
Description: | This is the post-print of the Article. The official published version can be accessed from the links below. Copyright @ 2013 Institution of Mechanical Engineers |
URI: | http://pic.sagepub.com/content/early/2013/03/13/0954406213480312 http://bura.brunel.ac.uk/handle/2438/7612 |
DOI: | http://dx.doi.org/10.1177/0954406213480312 |
ISSN: | 0954-4062 |
Appears in Collections: | Mechanical and Aerospace Engineering Advanced Manufacturing and Enterprise Engineering (AMEE) Dept of Mechanical and Aerospace Engineering Research Papers |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Fulltext.pdf | 679.17 kB | Adobe PDF | View/Open |
Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.