Collection's Items (Sorted by Submit Date in Descending order): 2431 to 2480 of 2822
| Issue Date | Title | Author(s) |
| 2013 | Fracture and impact properties of short discrete jute fibre-reinforced cementitious composites | Zhou, XM; Ghaffar, S; Dong, W; Oladiran, O; Fan, M |
| 2013 | CAI combustion of gasoline and its mixture with ethanol in a 2-stroke poppet valve DI gasoline engine | Zhang, Y; Zhao, H; Ojapah, M; Cairns, A |
| 2015 | Turbulent kinetic energy production in the vane of a low-pressure linear turbine cascade with incoming wakes | Michelassi, V; Wissink, JG |
| 2014 | Numerical investigation of nucleate boiling heat transfer on thin substrates | Sanna, A; Hutter, C; Kenning, DBR; Karayiannis, TG; Sefiane, K; Nelson, RA |
| 2011 | Electrospinning of poly(ethylene-co-vinyl alcohol) nanofibres encapsulated with Ag nanoparticles for skin wound healing | Xu, C; Xu, F; Wang, B; Lu, T |
| 2014 | Droplet/ligament modulation of local small-scale turbulence and scalar mixing in a dense fuel spray | Shinjo, J; Xia, J; Umemura, A |
| - | Droplet/ligament modulation of local small-scale turbulence and scalar mixing in a dense fuel spray | Shinjo, J; Xia, J; Umemura, A |
| 2015 | A fractional rate-dependent cohesive-zone model | Musto, M; Alfano, G |
| 2014 | Equivalent circuits and efficacy of single-layer ACPEL devices | Winscom, CJ; Harris, PG; Silver, J |
| 2014 | Physics of puffing and microexplosion of emulsion fuel droplets | Shinjo, J; Xia, J; Ganippa, LC; Megaritis, A |
| 2009 | Designing sustainable medical devices | Marshall, J-L; Hinton, M; Wrobel, L; Troisi, G |
| 2014 | Flight testing the Titanic: re-visiting the loss of His Majesty's Airship R101 | Gratton, G |
| 2015 | Performance of pilot-scale microbial fuel cells treating wastewater with associated bioenergy production in the Caribbean context | Tota-Maharaj, K; Paul, P |
| 2015 | An extended finite element model for modelling localised fracture of reinforced concrete beams in fire | Liao, F; Huang, Z |
| 2014 | Modelling partial end-plate connections under fire conditions | Lin, S; Huang, Z; Fan, M |
| 2015 | Progressive failure modelling and ductility demand of steel beam-to-column connections in fire | Sun, R; Burgess, IW; Huang, Z; Dong, G |
| 2014 | Effect of projectile nose shape on ballistic resistance of interstitial-free steel sheets | Kpenyigba, KM; Jankowiak, T; Rusinek, A; Pesci, R; Wang, B |
| 2015 | Review of feature boundary identification techniques for the characterization of tessellated surfaces | MacAulay, GD; Senin, N; Giusca, C; Leach, R; Ivanov, A |
| 2014 | Design of a pulse power supply unit for micro-ECM | Spieser, A; Ivanov, A |
| 2014 | Design of an electrochemical micromachining machine | Spieser, A; Ivanov, A |
| 2015 | Influence of temperature on the performance of a full-scale activated sludge process operated at varying solids retention times whilst treating municipal sewage | Shahzad, M; Khan, SJ; Paul, P |
| 2014 | Finite element modelling of atomic force microscope cantilever beams with uncertainty in material and dimensional parameters | Wang, B; Wu, X; Gan, T-H; Rusinek, A |
| 2011 | Non-Newtonian and flow pulsatility effects in simulation models of a stented intracranial aneurysm | Cavazzuti, M; Atherton, MA; Collins, MW; Barozzi, GS |
| 2015 | Clustering disaggregated load profiles using a Dirichlet process mixture model | Granell, R; Axon, CJ; Wallom, DCH |
| 2014 | Integrity of subsea control umbilical | Yasseri, R; Yasseri, S; Wang, B |
| 2013 | Self-noise produced by an airfoil with nonflat plate trailing-edge serrations | Chong, TP; Vathylakis, A; Joseph, PF; Gruber, M |
| 2015 | Investigating the intrinsic noise limit of Dayem bridge NanoSQUIDs | Patel, T; Li, B; Gallop, J; Cox, D; Kirkby, K; Romans, E; Chen, J; Nisbet, A; Hao, L |
| 2014 | MICE Running April 2014 | Dobbs, A; Nebrensky, H |
| 2014 | Experimental and analytical performance investigation of air to air two phase closed thermosyphon based heat exchangers | Danielewicz, J; Sayegh, MA; Śniechowska, B; Szulgowska-Zgrzywa, M; Jouhara, H |
| 2015 | On the use of power reflection ratio and phase change to determine the geometry of a blockage in a pipe | Duan, W; Kirby, R; Prisutova, J; Horoshenkov, KV |
| 2-Jul-2014 | On the use of power reflection ratio and phase change to determine the geometry of a blockage in a pipe | Duan, W; Kirby, R; Prisutova, J; Horoshenkov, KV |
| 2014 | Measurement of the bulk acoustic properties of fibrous materials at high temperatures | Williams, PT; Kirby, R; Malecki, C; Hill, J |
| 2014 | On the modification of Delany and Bazley fomulae | Kirby, R |
| 2013 | The thermodynamics of metabolism, cardiovascular performance and exercise, in health and diabetes: The objective of clinical markers | König, CS; Ramachandran, S; González-Alonso, J; Atherton, MA; Collins, MW |
| 2014 | Assisting the autistic To reduce anxiety caused by their environment | Rotter, KRG; Atherton, MA |
| 2014 | Effect of surface roughness on friction behaviour of steel under boundary lubrication | Yamaguchi, K; Sasaki, C; Tsuboi, R; Atherton, MA; Stolarski, T; Sasaki, S |
| 2015 | Sustainable approaches for stormwater quality improvements with experimental geothermal paving systems | Tota-Maharaj, K; Paul, P |
| 2014 | A three dimensional investigation into the acoustic performance of dissipative splitter silencers | Kirby, R; Williams, PT; Hill, J |
| 2014 | On the acoustic performance of rectangular splitter silencers in the presence of mean flow | Kirby, R; Amott, K; Williams, PT; Duan, W |
| 2014 | Parameterization of travelling waves in plane Poiseuille flow | Smith, WR; Wissink, JG |
| 2014 | Some fundamental aspects of self-levitating sliding contact bearings and their practical implementations | Atherton, MA; Mares, C; Stolarski, TA |
| 2014 | Investigation of cylinder deactivation and variable valve actuation on gasoline engine performance | Kuruppu, C; Pesiridis, A; Rajoo, S |
| 2014 | The Explicit Green's Approach with stability enhancement for solving the bioheat transfer equation | Loureiro, FS; Mansur, WJ; Wrobel, LC; Silva, JEA |
| 2014 | A topological optimization procedure applied to multiple region problems with embedded sources | Anflor, CTM; Albuquerque, EL; Wrobel, LC |
| 2014 | Modelling and optimisation of the operation of a radiant warmer | Fic, AM; Ingham, DB; Ginalski, MK; Nowak, AJ; Wrobel, LC |
| 2014 | Trailing Edge Noise Reduction by Passive and Active Flow Controls | Kim, JH; Al-Sadawi, L; Vathylakis, A; Chong, TP |
| 2014 | New inference for constant-stress accelerated life tests with Weibull distribution and progressively type-II censoring | Wang, BX; Yu, K; Sheng, Z |
| 2014 | Assessment of turbocharger turbine unsteady flow modelling methodology on engine performance | Mustafa, A; Martinez-Botas, RF; Pesiridis, A; Chiong, MS; Rajoo, S |
| 2014 | Investigation of combustion, performance and emission characteristics of 2-stroke and 4-stroke spark ignition and CAI/HCCI operations in a DI gasoline | Zhang, Y; Zhao, H |
| 2014 | An investigation of the consumer perception on the quality of the gluten and wheat free breads available on the UK market | Potter, R; Stojceska, V; Plunkett, A |
Collection's Items (Sorted by Submit Date in Descending order): 2431 to 2480 of 2822
