Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/21278
Title: Development and Testing of an Ultrasound-Compatible Cardiac Phantom for Interventional Procedure Simulation Using Direct Three-Dimensional Printing
Authors: Wang, S
Noh, Y
Brown, J
Roujol, S
Li, Y
Housden, R
Casajuana Ester, M
Al-Hamadani, M
Rajani, R
Rhode, K
Keywords: cardiac phantom;interventional cardiology;3D printing;multimodal imaging
Issue Date: 29-Sep-2020
Citation: Wang, S., Noh, Y., Brown, J., Roujol, S., Li, Y., Wang, S., Housden, R., Casajuana Ester, M., Al-Hamadani, M., Rajani, R. and Rhode, K. (2020) 'Development and Testing of an Ultrasound-Compatible Cardiac Phantom for Interventional Procedure Simulation Using Direct Three-Dimensional Printing', 3D Printing and Additive Manufacturing, 7 (6), pp. 269 - 278. doi: 10.1089/3dp.2019.0097.
Abstract: © Shu Wang et al., 2020. Organ phantoms are widely used for evaluating medical technologies, training clinical practitioners, as well as surgical planning. In the context of cardiovascular disease, a patient-specific cardiac phantom can play an important role for interventional cardiology procedures. However, phantoms with complicated structures are difficult to fabricate by conventional manufacturing methods. The emergence of three-dimensional (3D) printing with soft materials provides the opportunity to produce phantoms with complex geometries and realistic properties. In this work, the aim was to explore the use of a direct 3D printing technique to produce multimodal imaging cardiac phantoms and to test the physical properties of the new materials used, namely the Poro-Lay series and TangoPlus. The cardiac phantoms were first modeled using real data segmented from a patient chest computer tomography (CT) scan and then printed with the novel materials. They were then tested quantitatively in terms of stiffness and ultrasound (US) acoustic values and qualitatively with US, CT, and magnetic resonance imaging systems. From the stiffness measurements, Lay-fomm 40 had the closest Young's modulus to real myocardium with an error of 29–54%, while TangoPlus had the largest difference. From the US acoustics measurements, Lay-fomm 40 also demonstrated the closest soft tissue-mimicking properties with both the smallest attenuation and impedance differences. Furthermore, the imaging results show that the phantoms are compatible with multiple imaging modalities and thus have potential to be used for interventional procedure simulation and testing of novel interventional devices. In conclusion, direct 3D printing with Poro-Lay and TangoPlus is a promising method for manufacture of multimodal imaging phantoms with complicated structures, especially for soft patient-specific phantoms.
Description: Supplementary Material: Supplementary Video S1: https://www.liebertpub.com/doi/suppl/10.1089/3dp.2019.0097/suppl_file/Supp_Video1.mp4 Supplementary Video S2: https://www.liebertpub.com/doi/suppl/10.1089/3dp.2019.0097/suppl_file/Supp_Video2.mp4
URI: https://bura.brunel.ac.uk/handle/2438/21278
DOI: https://doi.org/10.1089/3dp.2019.0097
ISSN: 2329-7662
Appears in Collections:Dept of Mechanical and Aerospace Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdf944.46 kBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons