Please use this identifier to cite or link to this item: https://bura.brunel.ac.uk/handle/2438/34184
Title: Influence of scandium addition on the castability, elevated-temperature tensile and fatigue performance of A356 alloy
Authors: Khandelwal, Priyansh
Negrea, Raluca Florentina
Hayat, Asad
Nunn, Jason
Honan, Scott
Ji, Shouxun
Keywords: A356 alloy;fluidity;fading;fatigue behaviour;scandium;high-temperature tensile test
Issue Date: 14-Nov-2026
Publisher: Elsevier
Citation: Khandelwal, P. et al. (2026) 'Influence of scandium addition on the castability, elevated-temperature tensile and fatigue performance of A356 alloy', Journal of Alloys and Compounds, 0(in press, pre-proof), 192467, pp. 1–52. doi: 10.1016/j.jallcom.2026.192467.
Abstract: The influence of scandium (Sc) addition on the fluidity, grain-refinement fading, elevated-temperature tensile performance and fatigue behaviour of A356.2 alloy was systematically investigated. The addition of 0.2 wt.% Sc increased fluidity by 19.5% compared with the baseline alloy, whereas higher Sc additions reduced fluidity because of coarse primary Sc-containing intermetallics. Sc addition significantly refined the grain structure, reduced the secondary dendrite arm spacing (SDAS), modified the eutectic Si morphology and transformed Fe-containing intermetallic phases, resulting in a less heterogeneous microstructure. The Sc-modified alloy also exhibited relatively stable grain size during prolonged melt holding under the present experimental conditions, with only a 14% increase in grain size after 240 min of melt holding. Following T6 heat treatment, the Sc-modified alloy exhibited higher tensile strength and ductility at 200 °C. Atomic-resolution HAADF-STEM and STEM-EDS analyses confirmed ordered AlSc₂Si₂ dispersoids and revealed their close spatial association with Mg-Si-based precipitates and localised Mg enrichment at the dispersoid/α-Al interface. Crystallographic analysis further identified U1-(Al,Si)₂Mg at the examined interface, suggesting that this interfacial configuration may modify the local Mg-Si precipitation environment and contribute to strength retention during elevated-temperature deformation. The A356-0.2Sc-T6 alloy exhibited higher fatigue lives at several investigated stress amplitudes, although the response was not consistently improved across the entire stress range. The results demonstrate that Sc addition can modify the castability, microstructure and mechanical response of A356 alloy under the investigated conditions.
Description: Data Availability Statement: Data will be made available on request.
This is a PDF of an article that has undergone enhancements after acceptance, such as the addition of a cover page and metadata, and formatting for readability. This version will undergo additional copyediting, typesetting and review before it is published in its final form. As such, this version is no longer the Accepted Manuscript, but it is not yet the definitive Version of Record; we are providing this early version to give early visibility of the article. Please note that Elsevier’s sharing policy for the Published Journal Article applies to this version, see: https://www.elsevier.com/about/policies-and-standards/sharing#4-publishedjournal-article. Please also note that, during the production process, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.
Supplementary material is available online at: https://www.sciencedirect.com/science/article/pii/S0925838826065370#sec0130 .
URI: https://bura.brunel.ac.uk/handle/2438/34184
DOI: https://doi.org/10.1016/j.jallcom.2026.192467
ISSN: 0925-8388
Appears in Collections:Brunel Centre for Advanced Solidification Technology (BCAST)

Files in This Item:
File Description SizeFormat 
Pre-proof.pdfCopyright © 2026 The Author(s). Published by Elsevier B.V. This is an open access article under a Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/).4.21 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons