Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/8407
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorFan, Z-
dc.contributor.authorJiang, Bo-
dc.date.accessioned2014-05-12T11:15:22Z-
dc.date.available2014-05-12T11:15:22Z-
dc.date.issued2013-
dc.identifier.urihttp://bura.brunel.ac.uk/handle/2438/8407-
dc.descriptionThis thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.en_US
dc.description.abstractMagnesium alloys have been extensively used for structural and functional applications due to their low densities. In order to improve the mechanical properties, grain refinement of the microstructures of magnesium alloys has been studied for many years. However, an effective and efficient grain refiner or refinement technique hasn’t been achieved yet, especially for those with aluminium contained. In this study, solution for this problem has been discovered through further understanding of the solidification process, including the potency and the efficiency of nucleation particles, the role of solute, and the role of casting conditions. First of all, the study suggested that MgO particles can act as nuclei in magnesium alloys by measuring and analyzing the differences in cooling curves with various amount of endogenous MgO particles. The differences indicated that the number density of MgO particles has a huge influence on the microstructure. This idea has been fatherly proved by the inoculation of MgO particles in magnesium alloys because the microstructures have been significantly refined after the inoculation. A new kind of refiner (AZ91D-5wt%MgO) has been developed based on such understandings. Secondly, the study discovered that the role of solute has much smaller effect on the grain size than it was suggested in traditional understandings. The inverse-proportional relationship between the grain size and the solute is highly suspected and the major role of solute is to cause columnar- equiaxed transition. The role of casting conditions has also been studied in order to provide experimental evidence for the existence of melt quenching effect in magnesium alloys. It is shown that various casting conditions, such as pouring temperatures and mould temperatures, have large influence on the critical heat balance temperature after rapid pouring. In this study, a theoretical model based on the analysis of cooling curves is presented for grain size prediction. An analytical model of the advance of equiaxed solidification front is developed based on the understanding of the role of casting conditions. Eventually, all these understandings have been applied to magnesium direct-chill (DC) casting. The refined microstructure of DC cast ingots can further assist in understanding the mechanism of advanced shearing achieved by MCAST unit. The comparison of the ingots with and without melt shearing indicated that the advance shearing device can disperse MgO film into individual particles en_US
dc.language.isoenen_US
dc.relation.urihttp://bura.brunel.ac.uk/bitstream/2438/8407/1/FulltextThesis.pdf-
dc.subjectNucleationen_US
dc.subjectGrain refinementen_US
dc.subjectGrowth restrictionen_US
dc.subjectDirect chill castingen_US
dc.subjectEquiaxed solidification advancing modelen_US
dc.titleSolidification behaviour of magnesium alloysen_US
dc.typeThesisen_US
Appears in Collections:Brunel University Theses
Brunel Centre for Advanced Solidification Technology (BCAST)

Files in This Item:
File Description SizeFormat 
FulltextThesis.pdf8.06 MBAdobe PDFView/Open


Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.