Please use this identifier to cite or link to this item: http://bura.brunel.ac.uk/handle/2438/26759
Title: Numerical Study on Hydrogen–Gasoline Dual-Fuel Spark Ignition Engine
Authors: Aghahasani, M
Gharehghani, A
Mahmoudzadeh Andwari, A
Mikulski, M
Pesyridis, A
Megaritis, T
Könnö, J
Keywords: hydrogen direct injection;dual fuel;emission;CFD;spark ignition engine
Issue Date: 1-Nov-2022
Publisher: MDPI
Citation: Aghahasani, M. et al. (2022) 'Numerical Study on Hydrogen–Gasoline Dual-Fuel Spark Ignition Engine', Processes, 10 (11), 2249, pp. 1 - 15. doi: 10.3390/pr10112249.
Abstract: Copyright © 2022 by the authors. Hydrogen, as a suitable and clean energy carrier, has been long considered a primary fuel or in combination with other conventional fuels such as gasoline and diesel. Since the density of hydrogen is very low, in port fuel-injection configuration, the engine’s volumetric efficiency reduces due to the replacement of hydrogen by intake air. Therefore, hydrogen direct in-cylinder injection (injection after the intake valve closes) can be a suitable solution for hydrogen utilization in spark ignition (SI) engines. In this study, the effects of hydrogen direct injection with different hydrogen energy shares (HES) on the performance and emissions characteristics of a gasoline port-injection SI engine are investigated based on reactive computational fluid dynamics. Three different injection timings of hydrogen together with five different HES are applied at low and full load on a hydrogen–gasoline dual-fuel SI engine. The results show that retarded hydrogen injection timing increases the concentration of hydrogen near the spark plug, resulting in areas with higher average temperatures, which led to NOX emission deterioration at −120 Crank angle degree After Top Dead Center (CAD aTDC) start of injection (SOI) compared to the other modes. At −120 CAD aTDC SOI for 50% HES, the amount of NOX was 26% higher than −140 CAD aTDC SOI. In the meanwhile, an advanced hydrogen injection timing formed a homogeneous mixture of hydrogen, which decreased the HC and soot concentration, so that −140 CAD aTDC SOI implied the lowest amount of HC and soot. Moreover, with the increase in the amount of HES, the concentrations of CO, CO2 and soot were reduced. Having the HES by 50% at −140 CAD aTDC SOI, the concentrations of particulate matter (PM), CO and CO2 were reduced by 96.3%, 90% and 46%, respectively. However, due to more complete combustion and an elevated combustion average temperature, the amount of NOX emission increased drastically.
Description: Data Availability Statement: This study did not report any data.
URI: https://bura.brunel.ac.uk/handle/2438/26759
DOI: https://doi.org/10.3390/pr10112249
Other Identifiers: ORCID iDs: Mahdi Aghahasani https://orcid.org/0000-0003-1100-5897 ; Ayat Gharehghani https://orcid.org/0000-0002-6482-3570; Amin Mahmoudzadeh Andwari https://orcid.org/0000-0003-1775-2463; Maciej Mikulski https://orcid.org/0000-0001-8903-4693; Apostolos Pesyridis https://orcid.org/0000-0001-7497-9213; Thanos Megaritis https://orcid.org/0000-0003-4984-0767.
2249
Appears in Collections:Dept of Mechanical and Aerospace Engineering Research Papers

Files in This Item:
File Description SizeFormat 
FullText.pdfCopyright © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).5.88 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons