Collection's Items (Sorted by Submit Date in Descending order): 1251 to 1300 of 2780
| Issue Date | Title | Author(s) |
| 23-Jun-2019 | Optoelectronic Sensor-based Shape Sensing Approach for Flexible Manipulators | Noh, Y |
| 2019 | Modelling friction in a particle to particle SPH contact algorithm | Campbell, J; De Vuyst, T; Vignjevic, R; Djordjevic, N; Hughes, K |
| Sep-2017 | Desorption characteristics of H<inf>2</inf>O and CO<inf>2</inf> from alumina F200 under different feed/purge pressure ratios and regeneration temperatures | Shi, YF; Liu, XJ; Guo, Y; Kalbassi, MA; Liu, YS |
| 22-Nov-2017 | Use of a hardware token for Grid authentication by the MICE data distribution framework | Nebrensky, JJ; Martyniak, J |
| 2016 | Trimming Simulation of Forming Metal Sheets IsoGeometric Models by Using NURBS Surfaces | Adan, DH; Cardoso, RP; Adetoro |
| 19-Sep-2017 | Comparative analysis on the energy use and environmental impact of different refrigeration systems for frozen food supermarket application | Mylona, Z; Kolokotroni, M; Tsamos, K; Tassou, SA |
| 31-Oct-2017 | Organic and inorganic fouling in heat exchangers – Industrial case study: Analysis of fouling state | Diaz-Bejarano, E; Behranvand, E; Coletti, F; Mozdianfard, MR; Macchietto, S |
| 26-Apr-2019 | Variable valve actuation–based combustion control strategies for efficiency improvement and emissions control in a heavy-duty diesel engine | Guan, W; Pedrozo, VB; Zhao, H; Ban, Z; Lin, T |
| 16-Jul-2019 | Optical study of gasoline substitution ratio and diesel injection strategy effects on dual-fuel combustion | Mirmohammadsadeghi, M; Zhao, H; Ito, A |
| 22-Sep-2017 | Ultrasound assisted casting of an AM60 based metal matrix nanocomposite, its properties, and recyclability | Dieringa, H; Katsarou, L; Buzolin, R; Szakács, G; Horstmann, M; Wolff, M; Mendis, C; Vorozhtsov, S; StJohn, D |
| 29-Mar-2019 | On high velocity impact on carbon fibre reinforced polymers | Vignjevic, R; Djordjevic, N; Wasilczuk, A; De Vuyst, T; Meo, M |
| 3-Jul-2019 | Formation of strength platform in cast Al–Si–Mg–Cu alloys | Dong, X; Amirkhanlou, S; Ji, S |
| 3-Apr-2018 | Exploring the NOx Reduction Potential of Miller Cycle and EGR on a HD Diesel Engine Operating at Full Load | Guan, W; Pedrozo, V; Zhao, H; Ban, Z; Lin, T |
| 12-Jul-2019 | The effects of residual gas trapping on part load performance and emissions of a spark ignition direct injection engine fuelled with wet ethanol | Lanzanova, TDM; Dalla Nora, M; Martins, MES; Machado, PRM; Pedrozo, VB; Zhao, H |
| 3-Jun-2019 | Performance, regulated and unregulated exhaust emission of a stationary compression ignition engine fueled by water-ULSD emulsion | Dhahad, HA; Chaichan, MT; Megaritis, T |
| 7-Feb-2018 | Exploring alternative combustion control strategies for low-load exhaust gas temperature management of a heavy-duty diesel engine | Guan, W; Zhao, H; Ban, Z; Lin, T |
| 2019 | Experimental analysis of waste tyres as a sustainable source of energy | Czajczyńska, D; Czajka, KM; Krzyzyńska, R; Jouhara, H |
| 12-Nov-2015 | A molecular dynamics simulation of the turbulent Couette minimal flow unit | Smith, ER |
| 22-May-2012 | Control-volume representation of molecular dynamics | Smith, ER; Heyes, DM; Dini, D; Zaki, TA |
| 12-Nov-2016 | Insight into the partial solutionisation of a high pressure die-cast Al-Mg-Zn-Si alloy for mechanical property enhancement | Yang, W; Liu, L; Zhang, J; Ji, S |
| 12-Jul-2019 | CFD Modeling to Predict Mass Transfer in Multicomponent Mixtures | Lavasani, MS; Rahimi, R; Zivdar, M; Kalbassi, M |
| 21-Apr-2018 | A new concept for growth restriction during solidification | Fan, Z; Gao, F; Zhou, L; Lu, SZ |
| 5-Jan-2017 | Effect of elevated temperature on pull-out behaviour of 4DH/5DH hooked end steel fibres | Abdallah, S; Fan, M; Rees, DWA |
| 2015 | Single phase flow pressure drop and heat transfer in rectangular metallic microchannels | Karayiannis, T; Sahar, AM; Ozdemir, MR; Fayyadh, EM; Wissink, J; Mahmoud, MM |
| 2017 | CFD Simulation and Experimental Study of Key Design Parameters of Solar Thermal Collectors | Allan, J; Dehouche, Z; Stankovice, S; Harries, A |
| 28-May-2019 | Acoustic emission monitoring of fatigue crack growth in mooring chains | Angulo, Á; Tang, J; Khadimallah, A; Soua, S; Mares, C; Gan, TH |
| 30-Jun-2017 | A One-Dimensional Gas Dynamics Code for Turbocharger Turbine Pulsating Flow Performance Modelling | Feneley, A; Pesiridis, A; Chen, H |
| 2019 | A High-Efficiency Two-Stroke Engine Concept: The Boosted Uniflow Scavenged Direct-Injection Gasoline (BUSDIG) Engine with Air Hybrid Operation | Wang, X; Zhao, H |
| 2019 | Drought Occurring With Hot Extremes: Changes Under Future Climate Change on Loess Plateau, China | Sun, CX; Huang, GH; Fan, Y; Zhou, X; Lu, C; Wang, XQ |
| 2019 | Influence of design embodiment on the performance of squeeze-film levitation contacts | Almurshedi, A; Atherton, M; Mares, C; Stolarski, T; Miyatake, M |
| 2019 | Spray characteristics of air-assisted urea -SCR sprays of sub-atmospheric temperatures | Kulkarni, A; Rohani, B; Megaritis, A; Ganippa, L |
| 1-Jul-2019 | Numerical simulation of fluid flow, solidification and defects in high pressure die casting (HPDC) process | Dou, K; Lordan, E; Zhang, Y; Jacot, A; Fan, Z |
| 2019 | A Rapid preliminary radial turbine expander design methodology for ORC waste heat recovery application | Sam, AA; Pesyridis, A |
| 5-Jul-2019 | Influence of Ni in high Fe containing recyclable Al-Si cast alloys | Basak, CB; Meduri, A; Nadendla, H |
| 2019 | A numerical study on the influence of internal corrugated reinforcements on the biaxial bending collapse of thin-walled beams | Vignjevic, R; Liang, C; Hughes, K; Brown, J; De Vuyst, T; Djordjevic, N; Campbell, J |
| 10-Jan-2018 | Effect of Bi on the microstructure and mechanical properties of Sn-Zn alloys | Ji, S; Liu, G |
| 17-Jun-2019 | The formation of Al<inf>6</inf> (Fe, Mn) phase in die-cast Al-Mg alloys | Zhu, X; Ji, S |
| 18-Jun-2019 | Application of the dual reciprocity method for the buckling analysis of plates with shear deformation | Soares, RA; Palermo, L; Wrobel, LC |
| 17-Feb-2018 | Nanoscale Zr-containing precipitates; a solution for significant improvement of high-temperature strength in Al-Si-Cu-Mg alloys | Rahimian, M; Amirkhanlou, S; Blake, P; Ji, S |
| 17-Apr-2019 | Microstructure and properties of CoCrNi medium-entropy alloy produced by gas atomization and spark plasma sintering | Wang, J; Yang, H; Ruan, J; Wang, Y; Ji, S |
| 31-May-2017 | Microstructure and mechanical properties of Sn–Cu alloys for detonating and explosive cords | Liu, G; Ji, S; Grechcini, L; Bentley, A; Fan, Z |
| 29-May-2017 | Macro-heterogeneities in microstructures, concentrations, defects and tensile properties of die cast Al–Mg–Si alloys | Ji, S; Yang, H; Cui, X; Fan, Z |
| 24-Dec-2016 | Interfacial characterisation of overcasting a cast Al-Si-Mg (A356) alloy on a wrought Al-Mg-Si (AA6060) alloy | Zhang, Y; Ji, S; Scamans, G; Fan, Z |
| 2019 | Integration of Anhydrous Sodium Acetate (ASAc) into Concrete Pavement for Protection Against Harmful Impact of De-icing Salt | Rahman, M; Al-Kheetan, MJ |
| 1-Apr-2018 | Microstructure and texture evolution of friction stir welded dissimilar aluminum alloys: AA2024 and AA6061 | Moradi, MM; Jamshidi Aval, H; Jamaati, R; Amirkhanlou, S; Ji, S |
| 31-May-2019 | FCVLP: A fuzzy random conditional value-at-risk-based linear programming model for municipal solid waste management | Wang, D; Kong, X; Zhao, S; Fan, Y |
| 2018 | Reinforcement of TiB2 Nanoparticles in Aluminium Piston Alloys for High Performance at Elevated Temperature | Zhang, Y; Amirkhanlou, S; Ji, S |
| 9 | Axial Flow Turbine Concept For Conventional And E-Turbocharging | Cappiello, A; Pesyridis, A; Tuccillo, R |
| 7-Apr-2018 | Dynamics of transversally vibrating non-prismatic Timoshenko cantilever beams | Navadeh, N; Hewson, RW; Fallah, AS |
| 2017 | Experimental investigations into power generation with low grade waste heat and R245fa Organic Rankine cycles (ORCs) | Li, L; Ge, Y; Luo, X; Tassou, S |
Collection's Items (Sorted by Submit Date in Descending order): 1251 to 1300 of 2780
