Collection's Items (Sorted by Submit Date in Descending order): 2201 to 2250 of 2848
| Issue Date | Title | Author(s) |
| 2016 | Development and Optimisation of Phase Change Material-Impregnated Lightweight Aggregates for Geopolymer Composites Made from Aluminosilicate Rich Mud and Milled Glass Powder | Kastiukas, G; Zhou, X; Castro Gomes, J |
| 2016 | A field study of wind dominant single sided ventilation through a narrow slotted architectural louvre system | Kolokotroni, M; O'Sullivan, P |
| 2016 | Rectangular Steel Silos: Finite Element Predictions of Filling Wall Pressures | Brown, CJ; Rotter, JM; Goodey, RJ |
| 2016 | Numerical Analysis of Shear-off Failure of Keyed Epoxied Joints in Precast Concrete Segmental Bridges | Shamass, R; Zhou, X; Wu, Z |
| 2016 | Material properties and compressive local buckling response of high strength steel square and rectangular hollow sections | Wang, J; Afshan, S; Schillo, N; Theofanous, M; Feldmann, M; Gardner, L |
| 2016 | Impact Properties of Hemp Fibre Reinforced Cementitious Composites | Zhou, X; Madanipour, R; Ghaffar, S |
| 2016 | Modelling Post-tensioned Precast Concrete Segmental Girder Bridges with Keyed Joints – Preliminary Results | Sejkati, E; Zhou, X; Shamass, R; Mancini, G |
| 2016 | Investigating Crack Initiation and Propagation of Concrete in Restrained Shrinkage Circular/Elliptical Ring Test | Dong, W; Zhou, X; Wu, Z; Xu, B |
| 2016 | Experimental Studies on Void Detection in Concrete-filled Steel Tubes using Ultrasound | Dong, W; Wu, Z; Zhou, X; Tan, Y |
| 2016 | Engineering the heterogeneous nuclei in Al-Si alloys for solidification control | Bolzoni, L; Babu, N H |
| 2016 | Innovation diffusion of wearable mobile computing: Pervasive computing perspective | Taib, SM; De Coster, R |
| 2016 | A front-end lumped-parameter approach to planning physical Robust Engineering Design experiments on manufactured dynamic devices | Atherton, M |
| 2016 | A Framework of E-Health Systems Adoption and Telemedicine Readiness in Developing Countries | Abdullrahim, A; De Coster, R |
| 2016 | Modelling and empirical development of an anti/de-icing approach for wind turbine blades through superposition of different types of vibration | Habibi, H; Edwards, G; Sannassy, C; Kappatos, V; Lage, Y; Stein, J; Selcuk, C; Gan, TH |
| 2016 | A.C.Electroluminescent Lamps: Shedding some light on their mysteries | Harris, PG; den Engelsen, D; Fern, G; Silver, J |
| 22-Apr-2016 | High temperature shear horizontal electromagnetic acoustic transducer for guided wave inspection | Kogia, M; Gan, T-H; Balachandran, W; Livadas, M; Kappatos, V; Szabo, I; Mohimi, A; Round, A |
| 2016 | Portable automated radio-frequency scanner for non-destructive testing of carbon-fibre-reinforced polymer composites | Salski, B; Gwarek, W; Kopyt, P; Theodorakeas, P; Hatziioannidis, I; Koui, M; Chong, AYB; Tan, SM; Kappatos, V; Selcuk, C; Gan, TH |
| 2016 | Chemically roughened solid silver: A simple, robust and broadband SERS substrate | Wijesuriya, S; Burugapalli, K; Mackay, R; Ajaezi, GC; Balachandran, W |
| 2016 | Mathematical Modelling of a Brain Tumour Initiation and Early Development: A Coupled Model of Glioblastoma Growth, Pre-Existing Vessel Co-Option, Angiogenesis and Blood Perfusion | Cai, Y; Wu, J; Li, Z; Long, Q |
| 2016 | Analysis of the bond behaviour between prestressed strands and concrete in fire | Khalaf, J; Huang, Z |
| 2016 | Evaluation of the application of Phase Change Materials (PCM) on the envelope of a typical dwelling in the Mediterranean region | Panayiotou, GP; Kalogirou, SA; Tassou, SA |
| 2016 | A refining mechanism of primary Al<inf>3</inf>Ti intermetallic particles by ultrasonic treatment in the liquid state | Wang, F; Eskin, D; Mi, J; Connolley, T; Lindsay, J; Mounib, M |
| 2016 | Using strip theory to model vibrations in offshore risers | Madani, SH; Wissink, J; Bahai, H |
| 2016 | An investigation of surface defect formation in micro milling the 45% SiCp/Al composite | Liu, J; Cheng, K; Ding, H; Chen, S; Zhao, L |
| 2016 | Numerical modelling of the effect of using multi-explosives on the explosive forming of steel cones | De Vuyst, T; Kong, K; Djordjevic, N; Vignjevic, R; Campbell, JC; Hughes, K |
| - | Modeling temperature distribution inside an emulsion fuel droplet under convective heating: A key to predicting microexplosion and puffing | Shinjo, J; Xia, J; Megaritis, A; Ganippa, LC; Cracknell, RF |
| 2016 | Interface and bonding mechanisms of plant fibre composites: An overview | Zhou, Y; Fan, M; Chen, L |
| 2016 | A new Al-Zr-Ti master alloy for ultrasonic grain refinement of wrought and foundry aluminum alloys | Sreekumar, VM; Eskin, DG |
| 2016 | Contact Modelling in Isogeometric Analysis: Application to Sheet Metal Forming Processes | Cardoso, RP; Adetoro, OB; Adan, DH |
| 2015 | Effect of solutionising and ageing on the microstructure and mechanical properties of a high strength die-cast Al–Mg–Zn–Si alloy | Yan, F; Yang, W; Ji, S; Fan, Z |
| 2016 | Directly absorbingTherminol-Al2O3 nano heat transfer fluid for linear solar concentrating collectors | Muraleedharan, M; Singh, H; Suresh, S; Udayakumar, M |
| 2016 | Statistical-Empirical Modelling of Aerofoil Noise Subjected to Leading Edge Serrations and Aerodynamic Identification of Noise Reduction Mechanisms | Biedermann, T; Chong, TP; Kameier, F |
| 2016 | Cryopreservation: Methods, equipment and critical concerns | Nannou, TK; Jouhara, H; Trembley, J; Herrmann, J |
| 2016 | Cool and green roofs for storage buildings in various climates | Kolokotroni, M; Wines, C; Babiker, RMA; Da Silva, BH |
| 2016 | Tone noise reduction by plasma actuator on a flat plate with blunt trailing edge | Al-Sadawi, L; Chong, TP |
| 2016 | Aeroacoustic and flow assessments of the poro-serrated trailing edges | Chong, TP; Dubois, E; Vathylakis, A |
| 2016 | Sensitivity of aerofoil self noise reductions to serration flap angles | Vathylakis, A; Chong, TP; Paruchuri, C; Joseph, PF |
| 2016 | Nature-inspired aerofoil modification for leading edge interaction noise reductions | Juknevicius, A; Chong, TP |
| 2016 | Digital Evaluation of Sitting Posture Comfort in Human-vehicle System under Industry 4.0 Framework | Tao, Q; Kang, J; Sun, W; Li, Z; Huo, X |
| 2016 | Study on utilization of carboxyl group decorated carbon nanotubes and carbonation reaction for improving strengths and microstructures of cement paste | Yan, X; Cui, H; Qin, Q; Tang, W; Zhou, X |
| 2016 | Enhancing screw fixation in poor bone quality, an unmet clinical need | Procter, P; Brown, CJ |
| 2016 | Correlation of the movements of the Severn Suspension Bridge derived with GNSS with Temperature Variations. | roberts, GW; tang, X; Brown, CJ |
| 1-Dec-2016 | An experimental study of acoustic emission methodology for in service condition monitoring of wind turbine blades | Tang, J; Soua, S; Mares, C; Gan, TH |
| 2017 | Myo-Inositol based nano-PCM for Solar Thermal Energy Storage | Singh, DK; Suresh, S; Singh, H; Rose, BAJ; Tassou, S; Anantharaman, N |
| 2016 | Fast Segmentation of Industrial Quality Pavement Images using Laws Texture Energy Measures and k-Means Clustering | Mathavan, S; Kumar, A; Kamal, K; Nieminen, M; Shah, H; Rahman, M |
| 1-Aug-2017 | Thermal segragation of asphalt material in road repair | Byzyka, J; Rahman, M; Chamberlain, D |
| 2016 | The Performance of Crystalline Hydrophobic in Wet Concrete Protection | Rahman, M; Chamberlain, D |
| 27-Jun-2016 | Cold spraying - A materials perspective | Assadi, H; Kreye, H; Gärtner, F; Klassen, T |
| 29-Aug-2016 | Optimization of the poro-serrated trailing edges for broadband noise reduction | Chong, TP; Dubois, E |
| 2016 | A one dimensional numerical approach for computing the eigenmodes of elastic waves in buried pipelines | Duan, W; Kirby, R; Mudge, P; Gan, TH |
Collection's Items (Sorted by Submit Date in Descending order): 2201 to 2250 of 2848
