Collection's Items (Sorted by Submit Date in Descending order): 801 to 850 of 2705
| Issue Date | Title | Author(s) |
| 22-Apr-2017 | T-stress solutions for through-wall circumferential cracks in straight pipes under bending | Gintalas, M; Ainsworth, RA; Scenini, F |
| 2018 | Stability of retained austenite in martensitic high carbon steels. Part II: Mechanical stability | Cui, W; Gintalas, M; Rivera-Diaz-del-Castillo, PEJ |
| 18-Mar-2021 | The development of low-temperature heat-treatable high pressure die-cast Al-Mg-Fe-Mn alloys with Zn levels | Zhu, X; Liu, F; Wang, S; Ji, S |
| 27-Feb-2021 | From simple binary to complex multicomponent eutectic alloys | Chang, I; Cai, Q |
| 31-Aug-2020 | Re: Two metres or one: what is the evidence for physical distancing in covid-19? | Axon, C; Dingwall, R |
| 27-Feb-2021 | Numerical methodology and CFD simulations of a rotary vane energy recovery device for seawater reverse osmosis desalination systems | Ye, F; Bianchi, G; Rane, S; Tassou, S; Deng, S |
| 27-Feb-2021 | Insights into near nozzle spray evolution, ignition and air/flame entrainment in high pressure spray flames | Avulapati, MM; Pos, R; Megaritis, A; Ganippa, L |
| 7-Oct-2020 | Hydrodynamics across a fluctuating interface | Smith, ER; Braga, C |
| 18-Sep-2020 | Cathodoluminescence imaging in the electron microscope (Keynote Address) | Fern, G |
| 10-Jul-2019 | Application of SPH to solid mechanics problems | De Vuyst, T; Vignjevic, R; Campbell, J; Djordjevic, N; Hughes, K |
| 20-Feb-2021 | A constraint correction method based on use of a single test specimen | Gintalas, M; Ainsworth, RA |
| 15-Mar-2021 | Numerical Investigation of an RCCI engine fueled with natural gas/dimethyl-ether in various injection strategies | Gharehghani, A; Kakoee, A; Andwari, AM; Megaritis, A; Pesyridis, A |
| 1-Feb-2021 | Towards Standardized Acquisition with a Dual-probe Ultrasound Robot for Fetal Imaging | Housden, J; Wang, S; Bao, X; Zheng, J; Skelton, E; Matthew, J; Noh, Y; Eltiraifi, O; Singh, A; Singh, D; Rhode, K |
| 16-Feb-2021 | Stochastic Modeling of Vehicle Arrival for the UK’s First Electric Vehicle Charging Forecourt | Aboshady, FM; Pisica, I; Axon, CJ |
| 11-Feb-2021 | Investigation on a full-scale heat pipe heat exchanger in the ceramics industry for waste heat recovery | Jouhara, H; Bertrand, D; Axcell, B; Montorsi, L; Venturelli, M; Almahmoud, S; Milani, M; Ahmad, L; Chauhan, A |
| 15-Jun-2020 | Implications of Changing the Asymptotic Diastolic Pressure in the Reservoir-wave Model on Wave Intensity Parameters: A Parametric Study | Pomella, N; Rietzschel, ER; Segers, P; Khir, AW |
| 16-Dec-2020 | Experimental and theoretical investigation of the performance of an air to water multi-pass heat pipe-based heat exchanger | Jouhara, H; Almahmoud, S; Brough, D; Guichet, V; Delpech, B; Chauhan, A; Ahmad, L; Serey, N |
| 2013 | Breakwater Layout Optimisation Using A Root-Finding Algorithm | Rustell, M |
| 17-Feb-2021 | Investigation of additive incorporation on rheological, microstructural and mechanical properties of 3D printable alkali-activated materials | Chougan, M; Ghaffar, SH; Sikora, P; Chung, S-Y; Rucinska, T; Stephan, D; Albar, A; Swash, MR |
| 10-Feb-2021 | Rooftop solar Photovoltaic (PV) plant – one year measured performance and simulations | Ates, AM; Singh, H |
| 26-Jan-2021 | Mechanism of Electronegativity Heterojunction of Nanometer Amorphous-Boron on Crystalline Silicon: An Overview | Sberna, P; Fang, PX; Fang, C; Nihtianov, S |
| 12-Jan-2021 | Numerical Design and Laboratory Testing of Encapsulated PCM Panels for PCM-Air Heat Exchangers | Santos, T; Wrobel, LC; Hopper, N; Kolokotroni, M |
| 1-Sep-2020 | Impact of urban albedo on microclimate: Computational investigation in London | Salvati, A; Kolokotroni, M; Kotopouleas, A; Watkins, R; Giridharan, R; Nikolopoulou, M |
| 16-Apr-2020 | Impact of urban albedo on microclimate and thermal comfort over a heat wave event in London | Salvati, A; Kolokotroni, M |
| 2-Sep-2019 | Microclimate Data For Building Energy Modelling: Study On ENVI-Met Forcing Data | Salvati, A; Kolokotroni, M |
| 27-Jul-2017 | Liquid layer envelope for reducing radiative losses in nanofluid-based volumetric receivers | Bhalla, V; Khullar, V; Singh, H; Tyagi, H |
| 26-Oct-2020 | Vacuum insulation panels (VIPs) for use in buildings | Rottenbacher, K; Singh, H; Tavares, J; Almeida, FA; Kolokotroni, M; Caps, R |
| 16-Dec-2020 | Direct Chill Casting and Extrusion of AA6111 Aluminum Alloy Formulated from Taint Tabor Scrap | Al-Helal, K; Patel, J; Scamans, G; Fan, Z |
| 29-Jan-2021 | A multi-hazard risk model with cascading failure pathways for the Dawlish (UK) railway using historical and contemporary data | Adams, K; Heidarzadeh, M |
| 7-Jan-2021 | Thermoelectric generator (TEG) technologies and applications | Jouhara, H; Żabnieńska-Góra, A; Khordehgah, N; Doraghi, Q; Ahmad, L; Norman, L; Axcell, B; Wrobel, L; Dai, S |
| 13-Jun-2017 | Friction Modelling in Particle-to-Particle Contact | Campbell, J; De Vuyst, T; Vignjevic, R; Djordjevic, N; Hughes, K |
| 5-Feb-2021 | Measurement of Electrical Resistivity of Hydrofluorocarbons – A Review | Ahmad, H; Balachandran, W; Manivannan, N |
| 5-Feb-2021 | Predicting response to a community-based educational workshop on incontinence among community-dwelling older women: post-hoc analysis of the CACTUS-D trial. | Xavier, F; van den Heuvel, E; Wagg, A; Ragot, S; Tannenbaum, C |
| 22-Nov-2013 | The influence of a bicycle commuter's appearance on drivers' overtaking proximities: An on-road test of bicyclist stereotypes, high-visibility clothing and safety aids in the United Kingdom | Walker, I; Garrard, I; Jowitt, F |
| 20-Nov-2020 | Buried (drift-filled) hollows in London – a review of their location and key characteristics | Flynn, AL; Collins, PEF; Skipper, JA; Pickard, T; Koor, N; Reading, P; Davis, JA |
| 7-Oct-2020 | Novel multi-zone self-heated composites tool for out-of-autoclave aerospace components manufacturing | Jayasree, N; Omairey, S; Kazilas, M |
| 1-Sep-2020 | Preface to Journal of Physics: Conference Series | Manivannan, N; Hadjiloucas, S |
| 9-Dec-2020 | Vine copula ensemble downscaling for precipitation projection over the Loess Plateau based on high-resolution multi-RCM outputs | Fan, Y; Sun, C; Hang, G; Zhou, X; Lu, C; Xiuquan, W |
| 9-Dec-2020 | The utilisation of useful ambient energy in residential dwellings to improve thermal comfort and reduce energy consumption | Rashad, M; Khordehgah, N; Żabnieńska-Góra, A; Ahmad, L; Jouhara, H |
| 10-Dec-2020 | Review of supercritical CO2 technologies and systems for power generation | White, MT; Bianchi, G; Chai, L; Tassou, SA; Sayma, AI |
| 10-Oct-2020 | NOx Abatement using DBD Nonthermal Plasma: Effect of Reactor Configurations | Amato, L; Abbod, M; Manivannan, N; Di Natale, F; Lancia, A; Balachandran, W |
| 21-Dec-2020 | Inertial drag and lift forces for coarse grains on rough alluvial beds measured using in-grain accelerometers | Maniatis, G; Hoey, T; Hodge, R; Rickenmann, D; Badoux, A |
| 10-Dec-2020 | Facile synthesis and defect optimization of 2D-layered MoS2 on TiO2 heterostructure for industrial effluent, wastewater treatments | Gopal, R; Chinnapan, MM; Bojarajan, AK; Rotte, NK; Ponraj, JS; Ganesan, R; Atanas, I; Nadarajah, M; Manavalan, RK; Gaspar, J |
| 15-Dec-2020 | Experimental Study of the Guided Wave Directivity Patterns of Thin Removable Magnetostrictive Patches | Zitoun, A; Dixon, S; Edwards, G; Hutchins, D |
| 17-Jan-2021 | The effects of natural gas quality on conventional dual-fuel and reactivity-controlled compression ignition (RCCI) combustion in a heavy-duty diesel engine | Pedrozo, V; Wang, X; Wei, G; Zhao, H |
| 9-Nov-2020 | Solid-state additive manufacturing of porous Ti-6Al-4V by supersonic impact | Moridi, A; Stewart, EJ; Wakai, A; Assadi, H; Gartner, F; Guagliano, M; Klassen, T; Dao, M |
| 2014 | Heat Treatment of Aluminium Foam Precursors: Effects on Foam Expansion and Final Cellular Structure | Lázaro, J; Solórzano, E; Rodríguez-Pérez, MA; Rämer, O; García-Moreno, F; Banhart, J |
| 2012 | Applicability of Solid Solution Heat Treatments to Aluminum Foams | Lázaro, J; Solórzano, E; Escudero, J; de Saja, J; Rodríguez-Pérez, M |
| 9-Jan-2021 | Investigations of split-injection ratios and dwell times on the spray characteristics using a solenoid high-pressure multi-hole injector | Dhanji, M; Zhao, H |
| 17-Oct-2020 | Transient analysis and control of a heat to power conversion unit based on a simple regenerative supercritical CO<inf>2</inf> Joule-Brayton cycle | Marchionni, M; Bianchi, G; Tassou, SA |
Collection's Items (Sorted by Submit Date in Descending order): 801 to 850 of 2705
