Collection's Items (Sorted by Submit Date in Descending order): 201 to 250 of 341
| Issue Date | Title | Author(s) |
| 1-Jan-2019 | Bistable Piezoelectric Flutter Energy Harvesting with Uncertainty | Khishnoud, F; Bowen, C; Mares, C |
| 2019 | Additive Manufacturing Technology in Construction | Ghaffar, S |
| 31-Aug-2019 | Experimental Study of Organic Rankine Cycle System and Expander Performance for Heavy-Duty Diesel Engine | Alshammari, F; Pesyridis, A |
| 2019 | Thermal Analysis of Hot Mix Asphalt Pothole Repair by Finite Element Method | Byzyka, J; Rahman, M; Chamberlain, D |
| 2019 | Residual Fire Resistance of Steel Frames Following Moderate Earthquake - A Case Study | Zhou, M; Jiang, L; Chen, S; Usmani, A; Cardoso, RP |
| 2019 | Rheological Characteristics of Crumb Rubber Modified Asphalt | Min-Chih, L; Rahman, M |
| 2019 | The role of ultrasonically induced acoustic streaming in developing fine equiaxed grains during the solidification of an Al-2% Cu alloy | Wang, G; Wang, Q; Balasubramani, N; Qian, M; Eskin, D; Dargusch, MS; StJohn, DH |
| 31-Jan-2019 | Elasticity versus hyperelasticity considerations in quasistatic modeling of a soft finger-like robotic appendage for real-time position and force estimation | Shiva, A; Sadati, SMH; Noh, Y; Fraś, J; Ataka, A; Würdemann, H; Hauser, H; Walker, ID; Nanayakkara, T; Althoefer, K |
| 10-Jul-2019 | Corrosion of steel fibre reinforced concrete (SFRC) subjected to simulated stray direct (DC) interference | Tang, K |
| 6-Feb-2019 | Stray alternating current (AC) induced corrosion of steel fibre reinforced concrete | Tang, K |
| 24-Jul-2019 | Numerical modelling of skin tumour tissue with temperature-dependent properties for dynamic thermography | Iljaž, J; Wrobel, LC; Hriberšek, M; Marn, J |
| 8-Aug-2019 | Field Surveys and Numerical Simulation of the 2018 Typhoon Jebi: Impact of High Waves and Storm Surge in Semi-enclosed Osaka Bay, Japan | Tuan-Anh, L; Takagi, H; Heidarzadeh, M; Takata, Y; Takahashi, A |
| 2-Aug-2019 | Nucleate Pool Boiling Heat Transfer in Wickless Heat Pipes (Two-Phase Closed Thermosyphons): A Critical Review of Correlations | Guichet, V; Almahmoud, S; Jouhara, H |
| 2017 | Design and Development of Continuous Melt-Conditioned Twin Roll Casting Process for Aluminium Alloys | Al-Helal, K; Thomas, PM; Fan, Z |
| 2019 | Turbomachinery Simulation Challenges and the Future | Tyacke, J; Vadlamani, NR; Trojak, W; Watson, R; Ma, Y; Tucker, PG |
| 3-May-2019 | Assessment of magnesium-based biomaterials: From bench to clinic | Razavi, M; Huang, Y |
| 16-Feb-2019 | Effect of Cu addition on the microstructure, mechanical and thermal properties of a piston Al-Si alloy | Chankitmunkong, S; Eskin, DG; Limmaneevichitr, C |
| 2019 | Testing, numerical simulation and design of prestressed high strength steel arched trusses | Afshan, S; Theofanous, M; Wang, J; Gkantou, M; Gardner, L |
| 4-Jul-2018 | Strengthening die-cast Al-Mg and Al-Mg-Mn alloys with Fe as a beneficial element | Zhu, X; Blake, P; Dou, K; Ji, S |
| 2019 | Understanding the highly dynamic phenomena in ultrasonic melt processing by ultrafast synchrotron x-ray imaging | Mi, J; Eskin, D; Connolley, T; Fezzaa, K |
| 2019 | Soft body impact resistance of composite foam core sandwich panels with unidirectional corrugated and tubular reinforcements | Vignjevic, R; Campbell, J; Hughes, K; Orłowski, M; Garcea, S; Withers, P; Reed, J |
| 15-May-2019 | Investigation of guided wave properties of anisotropic composite laminates using a semi-analytical finite element method | Duan, W; Gan, TH |
| 3-Nov-2018 | Parallel computation of aeroacoustics of industrially relevant complex-geometry aeroengine jets | Wang, ZN; Tyacke, J; Tucker, P; Boehning, P |
| 7-Sep-2018 | A generalized fuzzy chance-constrained energy systems planning model for Guangzhou, China | Cai, M; Huang, G; Chen, J; Li, Y; Fan, Y |
| 7-Dec-2018 | Hydrologic Impacts of Ensemble-RCM-Projected Climate Changes in the Athabasca River Basin, Canada | Zhou, X; Huang, G; Piwowar, J; Fan, Y; Wang, X; Li, Z; Cheng, G |
| 18-Apr-2019 | Effect of SiC nanoparticles on the microstructure and texture of friction stir welded AA2024/AA6061 | Moradi, MM; Jamshidi Aval, H; Jamaati, R; Amirkhanlou, S; Ji, S |
| 12-Apr-2018 | Automated Quality Characterization for Composites Using Hybrid Ultrasonic Imaging Techniques | Sun, J; Chong, AYB; Tavakoli, S; Feng, G; Kanfoud, J; Selcuk, C; Gan, TH |
| 30-Apr-2019 | Integrity Testing of Cast In Situ Concrete Piles Based on an Impulse Response Function Method Using Sine-Sweep Excitation by a Shaker | Zheng, H; Ertel, JP; Kourmpetis, M; Kanfoud, J; Niederleithinger, E; Gan, TH |
| 23-May-2019 | Cross Sectional Examination of a Fouled Tube Removed from a Crude Oil Preheat Exchanger | Coletti, F; Behranvand, E; Mozdianfard, MR; Diaz-Bejarano, E; Orzlowski, P; Macchietto, S |
| 2019 | Scaling of Lift Coefficient of an Airfoil with Leading Edge Serrations | Stalnov, O; Chong, TP |
| 6-Jun-2018 | The formation mechanism of Al<inf>6</inf>(Fe, Mn) in die-cast Al-Mg alloys | Zhu, X; Blake, P; Ji, S |
| 18-Oct-2017 | High performance gravity cast Al9Si0.45Mg0.4Cu alloy inoculated with AlB<inf>2</inf>and TiB<inf>2</inf> | Dong, X; Zhang, Y; Amirkhanlou, S; Ji, S |
| 6-Nov-2017 | Inhibition of sodium release from Zhundong coal via the addition of mineral additives: A combination of online multi-point LIBS and offline experimental measurements | Liu, Y; Wang, Z; Lv, Y; Wan, K; He, Y; Xia, J; Cen, K |
| 21-Nov-2017 | Investigation of warm gas clean-up of biofuel flue and producer gas using electrostatic precipitator | Poškas, R; Sirvydas, A; Poškas, P; Jouhara, H; Striūgas, N; Pedišius, N; Valinčius, V |
| 31-Oct-2018 | Dynamic plastic response of beams subjected to localised pulse loads | Thil, N; Mehreganian, N; Moatamedi, M; Louca, LA; Soleiman Fallah, A |
| 19-Apr-2019 | A tactile sensing approach in stroke rehabilitation | Du, X; Mikov, N; Mohagheghi, A; Kilbride, C; Norris, M; Brett, P |
| 2019 | Comparison of Stellite coatings on low carbon steel produced by CGS and HVOF spraying | Seraj, RA; Abdollah-zadeh, A; Dosta, S; Assadi, H; Garcia Cano, I |
| 2-Apr-2019 | An optimized, parameter-free PML-FEM for wave scattering problems in the ocean and coastal environment | Karperaki, AE; Papathanasiou, TK; Belibassakis, KA |
| 2018 | Study on the wear resistance of laser cladding iron-base alloy by heat treatment | Guo, W; Zhang, L; Xu, C; Chai, R; Gao, Z; Kogo, B; Chizari, M; Zhang, C; Wang, B |
| 2019 | Numerical and analytical investigation on elastic compound buckling of latticed columns considering eccentricity and geometric imperfections | Li, YQ; Cheng, WM; Wang, B; Ren, YZ |
| 2-Apr-2019 | Follow-up optimized phononic band structure design based on reserved inclusions | Wang, K; Liu, Y; Wang, B |
| 27-Mar-2019 | The role of deposition sequence in cold spraying of dissimilar materials | Nikbakht, R; Seyedein, SH; Kheirankish, S; Assadi, H; Jodoin, B |
| 2019 | A novel Fe <inf>40</inf> Mn <inf>40</inf> Cr <inf>10</inf> Co <inf>10</inf> /SiC medium-entropy nanocomposite reinforced by the nanoparticles-woven architectural structures | Wang, J; Yang, H; Liu, Z; Ji, S; Li, R; Ruan, J |
| 10-Feb-2019 | Numerical study of the mixture formation and stratified-flame-induced auto-ignition (SFI) combustion processes in a poppet-valve two-stroke direct injection gasoline engine | He, BQ; Lin, CL; Li, X; Wang, X; Zhao, H; Zhang, Y |
| 7-Feb-2018 | Modelling ground source heat pump system by an integrated simulation programme | Rui, Y; Garber, D; Yin, M |
| 2019 | Additive manufacture of passive acoustic filters: a feasibility study | Jiang, P; Atherton, M |
| 7-Mar-2019 | The effect of traverse speed on deposition efficiency of cold sprayed Stellite 21 | Seraj, RA; Abdollah-zadeh, A; Dosta, S; Canales, H; Assadi, H; Garcia Cano, I |
| 2018 | Guided wave propagation in buried and immersed fluid-filled pipes: Application of the semi analytic finite element method | Duan, W; Kirby, R |
| 18-Feb-2019 | Experimental investigation of the air-fuel charging process in a four-valve supercharged two-stroke cycle GDI engine | Nora, MD; Metzka Lanzanova, TD; Santos Martins, ME; Moreira Machado, PR; Zhao, H |
| 30-Aug-2018 | Thermohydraulic performance of microchannel heat sinks with triangular ribs on sidewalls – Part 1: Local fluid flow and heat transfer characteristics | Chai, L; Wang, L; Bai, X |
Collection's Items (Sorted by Submit Date in Descending order): 201 to 250 of 341
