Collection's Items (Sorted by Submit Date in Descending order): 451 to 500 of 622
| Issue Date | Title | Author(s) |
| 2015 | Microstructure and mechanical properties of ductile die-cast al-mg-si-mn alloys | Watson, Douglas |
| 2016 | Optimization of the ultrasonic processing in a melt flow | Tzanakis, I; Lebon, GSB; Eskin, DG; Pericleous, K |
| 2016 | Ultrasonic processing of molten and solidifying overview and outlook | Eskin, D |
| 2016 | A model of cavitation for the treatment of a moving liquid metal volume | Lebon, GSB; Pericleous, K; Tzanakis, I; Eskin, D |
| 2016 | Grain refinement of an Al-2 wt%Cu Alloy by Al3Ti1B master alloy and ultrasonic treatment | Wang, EQ; Wang, G; Dargusch, MS; Qian, M; Eskin, DG; StJohn, DH |
| 24-May-2016 | The effect of post-grinding heat treatment of alumina and Ag-Cu-Ti braze preform thickness on the microstructure and mechanical properties of alumina-to-alumina brazed joints | Kassam, TA; Nadendla, HB; Ludford, N; Buisman, I |
| 2016 | Heterogeneous Nb-based nuclei for the grain refinement of Al-Si alloys | Bolzoni, L; Hari Babu, N |
| 2015 | Controlling the formation of iron-bearing intermetallics in wrought al alloys by melt conditioned dc (MC-Dc) casting technology | Li, HT; Patel, JB; Kotadia, HR; Fan, Z |
| 2016 | A high strength aluminium alloy for high pressure die casting | Ji, S; Yang, F; Fan, Z |
| 2016 | Synchrotron quantification of ultrasound cavitation and bubble dynamics in Al-10Cu melts | Xu, WW; Tzanakis, I; Srirangam, P; Mirihanage, WU; Eskin, DG; Bodey, AJ; Lee, PD |
| 2016 | Calibration and performance assessment of an innovative high-temperature cavitometer | Tzanakis, I; Hodnett, M; Lebon, GSB; Dezhkunov, N; Eskin, DG |
| 2002 | Processing of immiscible alloys by a twin-screw rheomixing process | Fang, X; Ji, S; Fan, Z |
| 2002 | Twin-screw rheomoulding of AZ91D Mg-alloys | Ji, S; Fan, Z; Fang, X |
| 2002 | Solidification microstructures obtained by a novel twin-screw liquidus casting method | Ji, S; Das, A; Fan, S |
| 2014 | Effect of melt conditioning on heat treatment and mechanical properties of AZ31 alloy strips produced by twin roll casting | Das, S; Barekar, NS; El Fakir, O; Wang, L; Prasada Rao, AK; Patel, JB; Kotadia, HR; Bhagurkar, A; Dear, JP; Fan, Z |
| 2016 | Synchrotron radiographic studies of ultrasonic melt processing of metal matrix nano composites | Mirihanage, W; Xu, W; Tamayo-Ariztondo, J; Eskin, D; Garcia-Fernandez, M; Srirangam, P; Lee, P |
| 2014 | Melt Conditioned Direct Chill Casting (MC-DC) Process for Production of High Quality Aluminium Alloy Billets | Patel, JB; Li, H-T; Xia, M; Jones, S; Kumar, S; O'Reilly, K; Fan, Z |
| 2015 | Ultrasonic melt processing: Achievements and challenges | Eskin, DG |
| 2015 | Development of New Oxide Based Master Alloys and their Grain Refinement Potency in Aluminium Alloys | Sreekumar, VM; Hari Babu, N; Eskin, DG; Fan, Z |
| 2016 | Nb-based heterogeneous nuclei for enhanced α-Mg nucleation in Mg(-Al) alloys | Nadendla, H; Bolzoni, L; Joshi, U |
| 2016 | Wiebull analysis for the repeatibility of die castings made by an al-mg-si-mn alloy | Ji, S; Yang, H; Watson, D; Fan, Z |
| 2016 | Thermodynamics Calculation of Extra Mn Addition in the Recycling of Al-Si-Cu Aluminium Alloys | Ji, S; Gao, F; Fan, Z |
| 2015 | Effect of input power and temperature on the cavitation intensity during the ultrasonic treatment of molten aluminium | Tzanakis, I; Lebon, GSB; Eskin, DG; Pericleous, K |
| 2015 | The physical-mechanical and electrical properties of cast aluminum-based alloys reinforced with diamond nanoparticles | Vorozhtsov, SA; Khrustalyov, AP; Eskin, DG; Кulkov, SN; Alba-Baena, N |
| 2016 | Characterisation of the ultrasonic acoustic spectrum and pressure field in aluminium melt with an advanced cavitometer | Tzanakis, I; Lebon, GSB; Eskin, D; Pericleous, KA |
| 2014 | Solution heat treatment, forming and in-die quenching of a commercial sheet magnesium alloy into a complex-shaped component: experimentation and FE analysis | El Fakir, O; Das, S; Stone, I; Scamans, G; Fan, Z; Wang, L; Balint, D; Dear, JP; Lin, J |
| 2015 | Effect of Zr additions and annealing temperature on electrical conductivity and hardness of hot rolled Al sheets | Belov, NA; Alabin, AN; Matveeva, IA; Eskin, DG |
| 2015 | Dynamics of two interacting hydrogen bubbles in liquid aluminum under the influence of a strong acoustic field | Lebon, GSB; Pericleous, K; Tzanakis, I; Eskin, DG |
| 2015 | Effect of electroceramic particles on damping behaviour of aluminium hybrid composites produced by ultrasonic cavitation and mechanical stirring | Montalba, C; Eskin, DG; Miranda, A; Rojas, D; Ramam, K |
| 2015 | In situ synchrotron radiography and spectrum analysis of transient cavitation bubbles in molten aluminium alloy | Tzanakis, I; Xu, WW; Lebon, GSB; Eskin, DG; Pericleous, K; Lee, PD |
| 2015 | Evaluation of the effect of ultrasonic degassing on components produced by low pressure die casting | da Silva, M; Rebolledo, L; Pabel, T; Petkov, T; Planta, X; Tort, J; Eskin, D |
| 2015 | Repeatability of tensile properties in high pressure die-castings of an Al-Mg-Si-Mn alloy | Yang, H; Ji, S; Watson, D; Fan, Z |
| 2015 | On the effect of Nb-based compounds on the microstructure of Al-12Si alloy | Bolzoni, L; Nowak, M; Hari Babu, N |
| 2015 | Computational prediction of the refinement of oxide agglomerates in a physical conditioning process for molten aluminium alloy | Tong, M; Jagarlapudi, SC; Patel, JB; Stone, IC; Fan, Z; Browne, DJ |
| 2015 | Development of a high strength Al-Mg2Si-Mg-Zn based alloy for high pressure die casting | Ji, S; Yan, F; Fan, Z |
| 2015 | Formation and sedimentation of Fe-rich intermetallics in Al−Si−Cu−Fe alloy | Ji, S; Yang, W; Gao, F |
| 2015 | Grain boundary precipitation induced by grain crystallographic misorientations in an extruded Al-Mg-Si-Cu alloy | Yang, W; Ji, S; Li, Z; Wang, M |
| 2014 | Microstructural characteristics of diecast AlMgSiMn alloy | Ji, SX; Wang, Y; Watson, D; Fan, ZY |
| 12-Mar-2015 | Melt superheating on the microstructure and mechanical properties of diecast Al-Mg-Si-Mn alloy | Yang, W; Yang, X; Ji, S |
| 2015 | The application of external fields to the manufacturing of novel dense composite master alloys and Aluminum-based nanocomposites | Vorozhtsov, SA; Eskin, DG; Tamayo, J; Vorozhtsov, AB; Promakhov, VV; Averin, AA; Khrustalyov, AP |
| 2015 | In situ observation and analysis of ultrasonic capillary effect in molten aluminium | Tzanakis, I; Xu, WW; Eskin, DG; Lee, PD; Kotsovinos, N |
| 2011 | Grain refinement of DC cast magnesium alloys with intensive melt shearing | Zuo, YB; Jiang, B; Zhang, Y; Fan, Z |
| 2011 | Microstructure control during twin roll casting of an AZ31 magnesium alloy | Huang, Y; Bayandorian, I; Fan, Z |
| 2011 | Enhanced heterogeneous nucleation on oxides in Al alloys by intensive shearing | Li, HT; Wang, Y; Fan, Z |
| 2012 | Preliminary study of the characteristics of a high Mg containing Al-Mg-Si alloy | Yan, F; McKay, BJ; Fan, Z; Chen, MF |
| 2012 | Effect of intensive melt shearing on the formation of Fe-containing intermetallics in LM24 Al-alloy | Li, HT; Ji, S; Wang, Y; Xia, M; Fan, Z |
| 2012 | Modeling of primary dendrite arm spacing variations in thin-slab casting of low carbon and low alloy steels | Mehrara, H; Santillana, B; Eskin, DG; Boom, R; Katgerman, L; Abbel, G |
| 2012 | Effect of V and N on the microstructure evolution during continuous casting of steel | Santillana, B; Eskin, DG; Boom, R; Katgerman, L |
| 2008 | Superconducting properties of Gd-Ba-Cu-O single grains processed from a new, Ba-rich precursor compound | Shi, Y; Babu, NH; Iida, K; Cardwell, DA |
| 2008 | Single domain YBCO/Ag bulk superconductors fabricated by seeded infiltration and growth | Iida, K; Babu, NH; Shi, Y; Miyazaki, T; Sakai, N; Murakami, M; Cardwell, DA |
Collection's Items (Sorted by Submit Date in Descending order): 451 to 500 of 622
