Collection's Items (Sorted by Submit Date in Descending order): 401 to 450 of 668
| Issue Date | Title | Author(s) |
| 2012 | The fundamentals of two-phase flow in wet domestic central heating systems | Fsadni, Andrew M |
| 2012 | Criteria for acceptable stick force gradients of a light aeroplane | Bromfield, Michael |
| 2011 | Flow boiling pressure drop of R134a in micro diameter tubes: Experimental results and assessment of correlations | Mahmoud, MM; Karayiannis, TG; Kenning, DBR; 3rd Micro and Nano Flows Conference (MNF2011) |
| 2012 | Domestic UK retrofit challenge: Barriers, incentives and current performance leading into the green deal | Dowson, M; Poole, A; Harrison, DJ; Susman, G |
| 2008 | Aircraft control via variable cant-angle winglets | Bourdin, P; Gatto, A; Friswell, MI |
| 2011 | Experimental investigation of non-uniform heating effect on flow boiling instabilities in a microchannel-based heat sink | Bogojevic, D; Sefiane, K; Walton, AJ; Lin, H; Cummins, G; Kenning, DBR; Karayiannis, TG |
| 2011 | Compound effect of EHD and surface roughness in pool boiling and CHF with R-123 | Ahmad, SW; Karayiannis, TG; Kenning, DBR; Luke, A |
| 1984 | A study of unsteady flow wave attenuation in partially filled pipe networks | Bridge, Sarah |
| 2012 | Combined effect of electric field and surface modification on pool boiling of R-123 | Ahmad, Syed Waqas |
| 2011 | Improving the thermal performance of single-glazed windows using translucent granular aerogel | Dowson, M; Harrison, DJ; Craig, S; Gill, Z |
| 2008 | A thermo-fluid model for protective suiting used in fusion reactor shutdown operations | Tesch, K; Collins, MW; Karayiannis, TG; Atherton, MA; Edwards, P |
| 2008 | Experimental flow boiling study in a 0.52 mm diameter vertical tube using R134a | Shiferaw, J; Mahmoud, MM; Karayiannis, TG; Kenning, DBR |
| 2008 | A novel musculoskeletal joint modelling for orthopaedic applications | Ozada, Neriman |
| 1986 | A three-dimensional linear analysis of steady ship motion in deep water | Baar, Job |
| 2000 | Maturation of auditory parameters in the preterm infant with particular reference to diet | Blay, Matthew |
| 2012 | On the scattering of torsional elastic waves from axisymmetric defects in coated pipes | Kirby, R; Zlatev, Z; Mudge, P |
| 2011 | Streamlined life cycle assessment of transparent silica aerogel made by supercritical drying | Dowson, M; Grogan, M; Birks, T; Harrison, DJ; Craig, S |
| 2012 | Predicted and in situ performance of a solar air collector incorporating a translucent granular aerogel cover | Dowson, M; Pegg, I; Harrison, DJ; Dehouche, Z |
| 2012 | The radial integration boundary integral and integro-differential equation methods for numerical solution of problems with variable coefficients | Al-Jawary, Majeed |
| 2010 | Active flow control systems architectures for civil transport aircraft | Jabbal, M; Liddle, SC; Crowther, WJ |
| 2012 | Appraising the suitability of a hybrid piston for internal combustion engines and its fatigue characteristics | Unamka, Ugochukwu |
| 2007 | R134a flow boiling heat transfer in small diameter tubes | Huo, Y; Tian, S; Karayiannis, TG |
| 2009 | 1-D modelling and 3-D simulation of confined bubble formation and formation and pressure fluctuations during flow boiling in a microchannel with a rectangular cross-section of high aspect ratio | Gedupudi, S; Zu, YQ; Karayiannis, TG; Kenning, DBR; Yan, YY |
| 2010 | Analysis of energy use in crisp frying processes | Wu, H; Jouhara, H; Tassou, SA; Karayiannis, TG |
| 1980 | A study of tympanic membrane displacement | Marchbanks, Robert |
| 2011 | One-dimensional semimechanistic model for flow boiling pressure drop in small to micro passages | Shiferaw, D; Mahmoud, M; Karayiannis, TG; Kenning, DBR |
| 2009 | Grain refinement and nucleation processes in Aluminium alloys through liquid shearing | Haghayeghi, Reza |
| 2011 | Experimental investigation of gasoline – Dimethyl Ether dual fuel CAI combustion with internal EGR | Zhang, Haofan |
| 2012 | Design, implementation, and testing of advanced virtual coordinate-measuring machines | Hu, Y; Yang, Q; Sun, X |
| 1991 | A study of the influence of wall flexibility on pressure in rectangular silos | Jarrett, Neil Dennis |
| 2011 | Constant power - continuously variable transmission (CP-CVT): Optimisation and simulation | Bell, Colin Alexander |
| 2009 | Convolution based real-time control strategy for vehicle active suspension systems | Saud, Moudar |
| 2012 | Improved simulation of phase change processes in applications where conduction is the dominant heat transfer mode | Gowreesunker, BL; Tassou, SA; Kolokotroni, M |
| 2011 | Structural modelling and testing of failed high energy pipe runs: 2D and 3D pipe whip | Reid, SR; Wang, B; Aleyaasin, M |
| 2010 | Sustainable development strategies for product provision and manufacturing approaches | De Coster, R; Bateman, RJ; Plant, AVC |
| 2010 | Design for manufacture and sustainability in new product development | Plant, AVC; Harrison, DJ; Griffiths, BJ; De Coster, R |
| 2011 | Advanced operator splitting based semi-implicit spectral method to solve the binary and single component phase-field crystal model | Bansel, Gurvinder Singh |
| 2006 | Design and performance analysis of a novel face gas seal | Roberts-Haritonov, Lev |
| 2010 | Combustion and emission characteristics of biofuels in diesel engines | Labecki, Lukasz |
| 2007 | Project schedule optimisation utilising genetic algorithms | Lancaster, John |
| 1997 | Modeling the implementation of advanced manufacturing technologies in the Cypriot manufacturing industry | Efstathiades, Andreas |
| 2010 | The influence of magnetic field on wear in sliding contacts | Makida, Yutaka |
| 2008 | The near wall effect of synthetic jets in a boundary layer | Jabbal, M; Zhong, S |
| 2006 | The performance of round synthetic jets in quiescent flow | Jabbal, M; Wu, J; Zhong, S |
| 2011 | Running characteristics of aerodynamic bearing with self-lifting capability at low rotational speed | Stolarski, TA |
| 2011 | Numerical simulation of solid tumor blood perfusion and drug delivery during the “vascular normalization window” with antiangiogenic therapy | Lv, J; Cao, J; Cai, Y; Zhou, Y; Long, Q; Yao, W; Xu, S |
| 2010 | Particle image velocimetry measurements of the interaction of synthetic jets with a zero-pressure gradient laminar boundary layer | Jabbal, M; Zhong, S |
| 2003 | Analysis of heat dissipation from railway and automotive friction brakes | Voller, Gordon Paul |
| 2002 | The impact of the urban environment on the energy used for cooling buildings | Watkins, Richard |
| 1975 | On the mechanical behaviour of human tooth structures: An application of the finite element method of stress analysis | Wright, KWJ |
Collection's Items (Sorted by Submit Date in Descending order): 401 to 450 of 668
