Collection's Items (Sorted by Submit Date in Descending order): 351 to 400 of 679
| Issue Date | Title | Author(s) |
| 2010 | Performance evaluation of multilayer thin film coatings under mixed rolling-sliding dry contact conditions | Farley, J; Wrobel, LC; Mao, K |
| 2010 | Heat and mass transfer under an infant radiant warmer – Development of a numerical model | Fic, AM; Ingham, DB; Ginalski, MK; Nowak, AJ; Wrobel, L |
| 2009 | Numerical derivation of constitutive models for unbonded flexible risers | Alfano, G; Bahtui, A; Bahai, H |
| 2013 | A novel rate-dependent cohesive-zone model combining damage and visco-elasticity | Musto, M; Alfano, G |
| 2014 | Experimental investigation of the effects of simultaneous hydrogen and nitrogen addition on the emissions and combustion of a diesel engine | Megaritis, A |
| 2009 | Large eddy simulation of plume dispersion behind an aircraft in the take-off phase | Aloysius, SS; Wrobel, LC |
| 2013 | Gas phase thermometry of hot turbulent jets using laser induced phosphorescence | Zhao, H; Ganippa, L |
| 2007 | Investigation of performance and characteristics of a multi-cylinder gasoline engine with controlled auto-ignition combustion in naturally aspirated and boosted operation | Martins, Mario Eduardo Santos |
| 2006 | Advanced spreadsheet based methodology for the dynamic thermal modelling of buildings | Demetriou, Louis |
| 2005 | A finite element strategy applied to intramedullary nailing of the proximal femur | Simpson, David John |
| 2001 | Investigations into the effectiveness of measures to reduce the energy requirements of domestic dwellings in Cyprus | Florides, Georgios A |
| 1999 | New techniques for vibration condition monitoring: Volterra kernel and Kolmogorov-Smirnov | Andrade, Francisco Arruda Raposo |
| 1980 | The development of a bearing of high stiffness and a wide speed range | Salem, TM |
| 1990 | Motion and wave load analyses of large offshore structures and special vessels in waves | Wu, Xiong-Jian |
| 2013 | Single-phase flow and flow boiling of water in horizontal rectangular microchannels | Mirmanto |
| 2011 | Pre-clinical evaluation of the forces during limb lengthening using manual and automated devices | Sinclair, Rhona Ann |
| 2012 | Supply chain implications of sustainable design strategies for electronics products | De Coster, R; Bateman, RJ; Plant, AVC |
| 2012 | Investigating the effect of mechanical loading in a total reversed shoulder implant | Abulkhair, Nesreen |
| 2013 | Phase change thermal energy storage for the thermal control of large thermally lightweight indoor spaces | Gowreesunker, Baboo Lesh Singh |
| 2012 | The application of phase change materials to cool buildings | Susman, Gideon |
| 2013 | Artificial neural networks for controlling the temperature of internally cooled turning tools | Wardle, F; Minton, T; Ghani, SBC; Fϋrstmann, P; Roeder, M; Richarz, S; Sammler, F |
| 2013 | Internally-cooled tools and cutting temperature in contamination-free machining | Ferri, C; Minton, T; Ghani, SBC; Cheng, K |
| 2013 | Development of twin screw Rheo extrusion technology | Cassinath, Zen |
| 2000 | A new approach to planning in vitro and in vivo experiments for cardiovascular stents. (2) Planning of experiments | Atherton, MA; Doorly, DJ; Collins, MW; Sigwart, U |
| 2000 | A new approach to planning in vitro and in vivo experiments for cardiovascular stents. (1) Fundamentals of design procedures | Atherton, MA; Doorly, DJ; Collins, MW |
| 2002 | Genetic algorithm search for stent design improvements | Tesch, K; Atherton, MA; Collins, MW |
| 2002 | Partial CFD models of cardiovascular stents | Atherton, MA; Tesch, K |
| 2000 | Bond graph analysis in robust engineering design | Atherton, MA; Bates, RA |
| 2000 | Enhanced visualisation of complex thermofluid data: Vertical and horizontal combined convection and microscale heat transfer cases | Atherton, MA; Collins, MW; Piva, S; Barozzi, GS |
| 2002 | Effects of stents under asymmetric inflow conditions | Atherton, MA; Tesch, K; Collins, MW |
| 2011 | Multi-scale interaction of particulate flow and the artery wall | Halliday, I; Atherton, M; Care, CM; Collins, MW; Evans, D; Evans, PC; Hose, DR; Khir, AW; König, CS; Krams, R; Lawford, PV; Lishchuk, SV; Pontrelli, G; Ridger, V; Spencer, TJ; Ventikos, Y; Walker, DC; Watton, PN |
| 2011 | Evolution-based modelling of complex airport networks | Gegov, EA; Gegov, AE; Atherton, MA; Gobet, F |
| 2004 | Robust optimization of cardiovascular stents: A comparison of methods | Atherton, MA; Bates, RA |
| 2012 | Electro-spinning of poly (ethylene-co-vinyl alcohol) (EVOH) nanofibres for medical applications and its mechanical properties | Xu, Chao |
| 2013 | Community structure detection in the evolution of the United States airport network | Gegov, E; Atherton, MA; Postorino, MN; Gobet, F |
| 2009 | Robustness of complex networks to node and cluster damage | Gegov, E; Atherton, MA; Al-Raweshidy, H |
| 2005 | Experimental and bond graph based sensitivity calculations for micro-scale robust engineering design | Shen, Y; Perry, MA; Kaymak, E; Atherton, MA; Bates, RA; Wynn, HP |
| 2009 | Wall shear stress and arterial performance: two approaches based on engineering | Collins, MW; Koenig, CS; Atherton, MA |
| 2013 | Investigation of the entrainment and infiltration rates through air curtains of open low-front refrigerated display cabinets | Al-Sahhaf, Ahmad Ali |
| 2012 | Investigation and optimisation of commercial refrigeration cycles using the natural refrigerant CO2 | Shilliday, Jason Alexander |
| 2013 | Evaluation of the energy impact of PCM tiles in an Airport Terminal Departure hall | Gowreesunker, BL; Tassou, SA |
| 2013 | Coupled TRNSYS-CFD simulations evaluating the performance of PCM plate heat exchangers in an Airport Terminal building displacement conditioning system | Gowreesunker, BL; Tassou, SA; Kolokotroni, M |
| 2007 | The effects of magnetic fields on rolling contact fatigue wear | Iida, Yusuke |
| 2001 | Non-destructive characterisation of structural ceramics using impedance spectroscopy | Wang, Xin |
| 1997 | A numerical investigation of the interactions between adjacent cooling tower plumes | Bornoff, Robin B |
| 2002 | Numerical modelling of particulate and fibre reinforced composites | Knight, Matthew G |
| 2002 | A novel technique for evaluating the degradation of engine components non-destructively | Ali, Md Shawkat |
| 2010 | Integrating active thermal mass strategies in responsive buildings | Warwick, David James |
| 2013 | Experimental and numerical investigations of the optical and thermal aspects of a PCM-glazed unit | Gowreesunker, BL; Stankovic, SB; Tassou, SA; Kyriacou, PA |
| 2012 | Development and optimisation of two-line planar laser induced fluorescence technique for combustion measurements | Anbari Attar, Mohammadreza |
Collection's Items (Sorted by Submit Date in Descending order): 351 to 400 of 679
