Collection's Items (Sorted by Submit Date in Descending order): 121 to 170 of 653
Issue Date | Title | Author(s) |
2017 | Influences on consumers’ decision making and recognition memory: An investigation using fMRI, EEG and behavioural methods | Li, Lin |
2018 | A novel, internally structured stainless steel implant with titanium characteristics | Yazdifar, Mohammadreza |
2018 | Experimental study of a Miller cycle based approach for an efficient boosted downsized gasoline Di engine | Li, Yuanping |
2018 | Flow boiling in vertical small to micro scale tubes | Al Gaheeshi, Asseel Majed Rasheed |
2018 | Investigation of residual stresses in X65 narrow-gap pipe girth welds | Ren, Yao |
2018 | Experimental study of single sided ventilation through a multi-configuration slotted louvre system | O'Sullivan, Paul D. |
2018 | An experimental investigation of lean-burn dual-fuel combustion in a heavy duty diesel engine | May, Ian Alexander |
2017 | Statistical modelling of ECDA data for the prioritisation of defects on buried pipelines | Bin Muhd Noor, Nik Nooruhafidzi |
2016 | Mechanical behaviour of lined pipelines under welding and impact | Obeid, Obeid |
2018 | Electroencephalography (EEG) profile and sense of body ownership: a study of signal processing, proprioception and tactile illusion | Shahriari, Sheyda |
2017 | The forced vibrations of a cylinder at low Reynolds number flow, an investigation of the non-lock-in and lock-in regions | Angelopoulos, Konstantinos |
2018 | Vortex shedding-induced noise reduction using (DBD) plasma actuator | AL-Sadawi, Laith Ayad |
2018 | Crack tip opening displacement (CTOD) in single edge notched bend (SEN(B)) | Khor, WeeLiam |
2017 | Experimental and numerical study of air distribution and thermal environment control for chilled food manufacturing facilities | Parpas, Dimitris |
2018 | Numerical and experimental investigation of a multi-pass heat-pipe-based heat exchanger | Mroue, Hassan |
2018 | Radial turbine expander design, modelling and testing for automotive organic Rankine cycle waste heat recovery | Alshammari, Fuhaid |
2017 | An experimental study of ethanol-diesel dual-fuel combustion for high efficiency and clean heavy-duty engines | Bernardes Pedrozo, Vinícius |
2015 | Investigation into using Stand-Alone Building Integrated Photovoltaic System (SABIPV) as a fundamental solution for Saudi rural areas and studying the expected impacts | Albaz, Abdulkarim |
2017 | Oscillatory behaviour and strategy to reduce drilling vibration | Che Kar, Suriani Binti |
2017 | Experimental and computational study to improve energy efficiency of frozen food retail stores | Mylona, Zoi |
2017 | Stress-Strain data for metals in bar and sheet form: strain rate, thickness and temperature influences | Roshanaei, Sina |
2017 | Fatigue life prediction of threaded pipe connection | Beheshti, Milad |
2017 | The effects of Alumina purity, TICUSIL® braze preform thickness and post-grinding heat treatment on the microstructure, mechanical and nanomechanical properties of Alumina-to-Alumina brazed joints | Kassam, Tahsin Ali |
2017 | Guided wave evaluation of pipes using the first and second order torsional wave mode | Deere, Matthew |
2017 | The mechanism of leak-before-break fracture and its application in engineering critical assessment | Bourga, Renaud |
2017 | Statistical methods for the analysis of corrosion data for integrity assessments | Tan, Hwei-Yang |
2017 | 3D freeform surface measurement on coordinate measuring machine using photometric stereo method | Somthong, Thammarat |
2017 | Experimental and computational study of indirect expansion solar assisted heat pump system with latent heat storage for domestic hot water production | Youssef, Walid Mohamed Khalil Abdalla |
2016 | Development of an active morphing wing with novel adaptive skin for aircraft control and performance | Kaygan, Erdogan |
2016 | Effects of a Niobium-Boron grain refiner on undercooling and microstructural evolution of aluminium silicon alloys | Lloyd, Samuel Jordan |
2017 | Experimental investigations of anhydrous and wet ethanol combustion in a spark iginition engine | Metzka Lanzanova, Thompson Diordinis |
2014 | Investigation into the contribution of the MC-DC process on microstructural evolution of direct chill cast round ingots of 6XXX series aluminium alloys with an aim to reduce homogenisation | Jones, Simon John |
2017 | Planar laser induced fluorescence imaging and analysis with ethanol blended fuels in a direct injection spark ignition engine | Liu, Quan |
2017 | Processing of MgB2 bulk superconductor by infiltration and growth | Bhagurkar, Ashutosh |
2017 | Experimental and theoretical investigation of CO2 trans-critical power cycles and R245fa organic Rankine cycles for low-grade heat to power energy conversion | Li, Liang |
2016 | Development of generic grain refiner alloys for cast and wrought Al-alloys containing silicon and zirconium | Djan, Edward Kwafo |
2016 | Theoretical and experimental investigation of a novel hydraulically assisted turbocharger system for future automotive applications | Justus, Jack |
2016 | Plasma pre-treatment for adhesive bonding of aerospace composite components | Navarro Rodriguez, Berta |
2017 | An experimental investigation into tool wear in micro-drilling of aluminium, aluminium/copper metal alloys and carbon fibre reinforced composites | Cheng, Ming-Yi |
2016 | An analytical investigation into lead-time reduction in the manufacturing sector: a study of discrete manufacturing in Kurdistan region of Iraq | Jaff, Twana Abdlkader Husain |
2016 | Improvement of the properties of novel bioplastics through reactive compatibilization | Amini Shahsavarani, Arjang |
2016 | Understanding and development of high shear technology for liquid metal processing | Dybalska, Agnieszka |
2016 | Energy performance enhancement of crystalline silicon solar cells | Tahhan, Abdulla |
2016 | Spatio-temporal evolution of diesel sparys using high speed optical diagnostics | Pos, Radboud |
2016 | The application of aqueous two phase systems to the analysis of protein isoforms of importance in clinical biochemistry and biopharmaceutical production | Hameed, Rana Majeed |
2016 | Particle dispersion in aluminium and magnesium alloys | Yang, Xinliang |
2016 | Investigation of the energy efficient sustainable manufacturing approach and its implementation perspectives | Katchasuwanmanee, Kanet |
2017 | Numerical and analytical investigation into the plastic buckling paradox for metal cylinders | Shamass, Rabee |
2017 | The novel use of phase change materials in refrigerated display cabinets for energy conservation | Alzuwaid, Falah |
2016 | Investigation of the timetabling-based smart energy managment system for educational buildings and its implementation perspectives | Naji Rayeni Pour, Abdolreza |
Collection's Items (Sorted by Submit Date in Descending order): 121 to 170 of 653